Have a code reading 'Mis Fire cylinder #6

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Widdershins

New Member
Joined
Apr 15, 2016
Posts
3
Reaction score
0
Location
california
We have changed the coils and plugs , also put new plugs in #6 and moving the 'BAD' one to other cylinders and the code kept reading the same .
What started this was stuttering down the road and finally barely being able to make it down the road at 25 -30 mph, Ran so rough , hubby wanted to get a tow but we live in the middle of no where.
Any help is appreciated. Oh and is there a special tool to get the fuel rail off and is there a trick to depressing the system?
 

docraymund

Full Access Members
Joined
Feb 14, 2011
Posts
1,076
Reaction score
109
Location
philippines
Pull the fuel pump fuse and run the engine till it stops. The fuel system is now depressurized. You will need a repair manual eventually so go get one. You will also need to do a compression test on cylinder #6.
 
Top