Largest tires without lift?

[BIG GREEN FORD]

I had rubbing with my 315/70/r17 when i turned full lock and flexing put a 1/4 inch spacer and doesn't rubb at all now

 

[Pedition2000]

Interesting, at full lock I have no rubbing.

 

[BIG GREEN FORD]

Interesting, at full lock I have no rubbing.

I mean full lock and flexing at the same time.on my sway bar

 

[Pedition2000]

I see. I haven't done full lock and flexing. On the beach I try not to be in a full lock situation. Hard on components.

 

[Proprojects]

33's

http://www.expeditionforum.com/f46/finally-i-put-285-70-17s-my-02-nav-24317/

I'm running 285's on stock 17" wheels, its very close to the factory running boards, but it doesn't touch. Still running the factory air suspension with no lift.

 

[houlster]

295/70R18 (34.3")
Wheels are 18x8.5, 0 offset / 4.75" BS

1" crank on the t-bars. Bumper corners trimmed, but no rubbing.

Edit: Never added pictures...







--Dan

 

[Christopher]

I have 285 50 20, s on 20x10 mb motoring and they rub the sway bar at full lock. Also have 305 35 24 on 24x10 decenti no rub...

 

[Dragracer_Art]

315/70-17's no doubt are a perfect fit with very minimal trimming of the front bumper valance. This is the stock ride height with zero lift and it's gonna stay this way.

 

[Dragracer_Art]

Looks like there is a little rub on the frame at full lock. I never paid any attention to it cuz I normally don't turn the wheel full lock.

Ditto this

 

[Proprojects]

Very nice

VERY VERY NICE Dragracer! The stuffed look of 315's on a unlifted ride rocks. I wanted to run the 315's, bad, but after my Nav lets the air out of the bags I was afraid it would rub up front. After I delete the air ride, I'll have to run 315's.... 285's till then.

315/70-17's no doubt are a perfect fit with very minimal trimming of the front bumper valance. This is the stock ride height with zero lift and it's gonna stay this way.