Need help identifying a part...splash shield?

[Ben F]

Hey everybody...need a little help. I can't find anybody who has a clue as to what this is heard all sorts of names but none have been right. I just bought the grey front bumper cover for the suv(seen missing in pic #3). When I was getting ready to install I realized it it had nothing to attach to as another part was missing....the plastic piece right above the wheel protecting the engine components. Picture #1 shows how that piece connects to the grey cover piece on the side and #2 shows it ripped (sort of hard to see, & #3 is where it's completely ripped off but where it should connect to the bumper. Pic #5 was what I thought was suppose to be it, not to happy when I received a part as big as my hand. Literally looks like it belongs on a toy car lol. Pic #4 is the same name "inner fender splash shield etc" from rock auto but looks much different....would this be the right piece?? Any help would be much appreciated because I'm stuck until I figure this out. Thanks

 

[Bedrck47]

On rock auto Under inner fender


VARIOUS MFR FO1248120 {#4L1Z16103AA}
fender liner; Left Front fender inner panel

 

[Bedrck47]

 

[Ben F]

Are you sure because that doesn't look like the part that looks like a piece for the fender....I mean this thing is a more or less basically a sheet a plastic that folds in almost a u shape over the wheel. Lost at my picture again then look at this part I just don't see those fitting the same. Is it just the picture?

 

[Transporter]

Do you have a junk yard near you? If yes, call them and ask if they have the part then ask them for the part number so you can cross check it or go have a look at it.

 

[Ben F]

Yes I do. I'll try that only thing I'm worried about is idk the specific name myself and I haven't seemed to find anyone else who has so I feel like it leads me back to square one.

 

[Ben F]

I just figured I'd come across someone on the forum that knows the expedition front to back and would easily be able to identify it

 

[Hamfisted]

On the left front wheelwell there are two pieces to the wheelwell liner. The main piece is the big one you see that curves around the whole wheelwell ( FO1248120 ), then there is the small piece you see there from Rock Auto ( SKU 2241715 ) and that is a patch piece that's used only on the left side. The right side has a open hole there. So for the left side you need both pieces and several of those 1/4" plastic fasteners to secure it. Who cut up the liner in the first place ? Is it a 4x4 that had big tires on it or something?


-Mike

 

[Bedrck47]

well I figured that when I gave you the Fordparts.com link that you would go on that site and look up the information that I gave you and then you can see the parts breakdown

 

[Ben F]

Bedrck I did look up the part froM rock auto I was just saying it doesn't look like the right part to me.....based on my pictures I don't think it's a match

 

[Ben F]

Thanks Hamfisted I think were on to something there. Ill look when I get home late tonight. I didn't think it came in multiple pieces but that makes sense as to why that piece I got was so small (the liner patch) so I just need the liner on the left side? So the liner is split in 2 as well left & right?....so it's really like 3 pieces then.....uh it's a long story the bumper cover got damaged and that liner was hanging down smackin the wheel makin noises tearing them it up so I ripped it off because I was on the highway and had nothing to attach it to anyway.

 

[Bedrck47]

That is why I gave you the fordparts.com site it has a picture of all the parts. You just have to put some effort in looking for the part you need. All I can do is point you in the right direction I can't make you go to that site

 

[Ben F]

I've done that their site provides no help at all. you type in those keywords and get nothing. part number...nothing. so where exactly are you finding these pictures? get i can live chat with them tomorrow or take the other side off this weekend and try to find a part number

 

[Flexpedition]

Ford parts website refers to all of this this inner plastic an "apron".
Apron is your keyword to see the Ford schematics.

 

[Ben F]

got ya thanks flex. yea I'm thinking thats what i need just from what I'm seeing in the pictures as well