Parking Brake Adjustment

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

djb8161

New Member
Joined
Jan 19, 2005
Posts
4
Reaction score
0
Location
Seattle
Does anyone know the procedure for adjusting the parking brake. I fully engage the pedal but the rig still rolls in Park.
 

smo0othride

Full Access Members
Joined
May 26, 2003
Posts
834
Reaction score
4
Location
San Diego, CA
If you look under the drivers side of the truck, you will see a cable running parallel right beside the frame rail. Somewhere around the area at the back of the cab there will be an assembly connected to the cable which joings the cable into two seperate cables. If you look closely at the assembly, on the very end of the single cable there will be a nut, which when tightened will tighen all cables and the assembly. I recommend not tightening the nut too much, then you would place unneccesary tension on the cables.
 
OP
OP
D

djb8161

New Member
Joined
Jan 19, 2005
Posts
4
Reaction score
0
Location
Seattle
Sounds pretty simple. Thanks for the instructions. I'll let you know how it turns out.
 
Top