Tcm glx
Active Member
Hey guys, read several threads discussing adjusting the rear sensor for those with airbags. Anyone have a picture of the sensor. What does one adjust to keep the rear sitting a little higher??
Rear leveling sensor for airbags
- Thread starter Tcm glx
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
american steel
Full Access Members
instead of messing with the awful air ride throw in a set of springs. be done with the problematic air ride.
Bedrck47
Full Access Members
care to give us an idea of the year of your expedition other than 1st gen. as your profile says you have a 1993 Bronco
Update your signature line with year model and engine information. This can be done in the USER CP section as this information helps others give you replies specific to your vehicle.
Update your signature line with year model and engine information. This can be done in the USER CP section as this information helps others give you replies specific to your vehicle.
Tcm glx
Active Member
Sorry bout that. Updated, and I found the sensor. Thanks!,
Yudaman
Full Access Members
Air ride has no place on a truck!
Get rid of the air ride and you will be much happier. I know I am.
TactialMonkey
Full Access Members
there is a little shock looking thing with wires that mounts on the frame and on the axle just unhook the side on the axle and compress it withb your hands till you get a height you like then just unplug it it thinks it has load from a trailer or something and will lift the rear end up... i did this till i got coils
Similar threads
