krakoosh
Well-Known Member
I have an '03. The rear wiper has quit working this week. Fuse #1 and #38 are good. Glass raised the arm pivots fine. If anyone would like to walk me through how to proceed I would appreciate it. 

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

I did see some posts on that but if it pivots fine with the glass raised that shouldn't be an issue should it?
Mine pivoted just fine with the glass raised also but it had enough resistance that the motor couldn't turn it.
Sent from my iPhone using Tapatalk
Mine pivoted just fine with the glass raised also but it had enough resistance that the motor couldn't turn it.
Sent from my iPhone using Tapatalk
That's why I claimed its probably a failed motor if he linkage and arm operate properly... Motor is simple:
Pm me if you have any questions or need further help I'd be glad to do so
Sent from my iPhone using Tapatalk

Hello everyone. I purchased a 2004 Expedition at auction. So far I have replaced the front impact sensor, master window switch and rear floor/ceiling actuator door for HVAC. Mind you, I suck at anything mechanical. What I discovered was that the rear wiper didn't work. While troubleshooting, I discovered I was missing the wheel with the hole in it that would turn and move the wiper arm. Can that be purchased separately? Instead of purchasing an entire wiper motor that is. Also, what is it actually called?
Thank you!