SemiHemi297uc4ja
New Member
Hi all,
2008 Expy EB, power seat was working just fine, in fact all electrical was working just fine until a few weeks ago the drivers seat would move back for easy exit but would not return to my set position, sometimes it would move just a bit and stop.
Now here is the really screwy thing, I noticed that my mirrors were not staying in place, I have noticed that when I use the key fob to gain entry the mirror on the driver side would move hard up to the left and the seat will still not go back in place the passenger mirror would just move slightly, I can control it (the seat) with the switch so the motor is working and I can bring the mirror back in place.
If I use the keypad or key to enter the mirrors stay in place.
I tried the move it all the way back then press and hold until a click to reset but that has done nothing, I also notice that when I enter without the key fob that the seat tries to move but just a bit and I am still able to manually use the motor to move the seat.
Loose connection? I understand there may be a module under the seat to check relays etc..?
Any other suggestions? Thanks all!
2008 Expy EB, power seat was working just fine, in fact all electrical was working just fine until a few weeks ago the drivers seat would move back for easy exit but would not return to my set position, sometimes it would move just a bit and stop.
Now here is the really screwy thing, I noticed that my mirrors were not staying in place, I have noticed that when I use the key fob to gain entry the mirror on the driver side would move hard up to the left and the seat will still not go back in place the passenger mirror would just move slightly, I can control it (the seat) with the switch so the motor is working and I can bring the mirror back in place.
If I use the keypad or key to enter the mirrors stay in place.
I tried the move it all the way back then press and hold until a click to reset but that has done nothing, I also notice that when I enter without the key fob that the seat tries to move but just a bit and I am still able to manually use the motor to move the seat.
Loose connection? I understand there may be a module under the seat to check relays etc..?
Any other suggestions? Thanks all!