I'm putting a stock sub and amp in an exp that did not have one originally. Does someone have the wiring diagram for the harness that connects to the sub box? End goal is to my aftm head unit that has sub out run the ford amp and sub.
Stock Sub wiring diagram
- Thread starter tbsexp
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
RI-Matt
Full Access Members
Assuming its for a 98 Expy ?
Hopefully this works.
Matt
Hopefully this works.
Matt
RI-Matt
Full Access Members
From the head unit to the factory amp put a 1.5K Ohm resistor on the amp-remote wire, this will turn on the factory amp and eliminate turn-on pop.
Part can be had at most electronic stores ( ie. Radio Shack )
http://www.radioshack.com/product/index.jsp?productId=2062324
Matt
Part can be had at most electronic stores ( ie. Radio Shack )
http://www.radioshack.com/product/index.jsp?productId=2062324
Matt
i got the resistors last week and the ebay sub assembly finally arrived today
question - how do i wire this so it isn't on all the time ? the factory sub only has a power and ground so where does the aftm hu blue wire for turning on the amp go ?
question - how do i wire this so it isn't on all the time ? the factory sub only has a power and ground so where does the aftm hu blue wire for turning on the amp go ?
