Disclaimer: Links on this page pointing
to Amazon, eBay and other sites may include affiliate code. If you click them and
make a purchase, we may earn a small commission.
The 2nd gen do have a smaller opening than the 3rd gen. Also, the 09-up 150's have a totally different setup for the NAV setup than the Expys. They use a separate screen with the controls further down the center stack.
I just got out the ruler after forgetting for a couple of days. It should fit with little to no modification if were still going to go this route.
The opening for my navigation is 9 x 7.75 x 5 ( Diag x Width x Height )
The unit screen is 8 x 7.8 x 4.8 ( diag x Width x Height )
The chassis is 7 x 4 ( width x height )
By those numbers that unit should fit with little to no modification. But I'm gonna build a carputer with a 8" touch screen now. Just thought I would share what I found.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.