What did you do to the expy today

[BIG GREEN FORD]

Added a throttle body spacer,air intake silincer removal, and gotts mod, at the same time and i felt a BIG diffrence

 

[northernexp]

Quick pic after the polish and detail, I towed a car trailer with my toy car on it yesterday, 200 km round trip. It was my first time hauling with the expedition and I loved it! It pulled like a dream and the volant intake was doing its job pulling cold air in I was very pleased with the performance, it was really hot yesterday+33 degrees Celsius and I had the ac cranked the whole time, and the expedition didn't complain aT all. The 5.4 liter engine together with the factory towing package and transmission cooler is a very reliable system.

The trailer rental was 60$, fuel cost was 60$ also and took about 4 1/2 hours of my Saturday morning but I saved over 200$ even with the trailer rental and fuel. I was able to pick up a bumper and lip for my car on the local classifieds for 125$ that was freshly painted the exact color of my car, which was a total fluke and I still had 75$ in my pocket saved. All in all it was a very good day, thanks to my expedition.

I love my ford

 

[metaldrgn]

Finally replaced the bolts on my exhaust because it was rattling. The bolts were shanked out which I found they are made to do. I could have shimmed them with washers but new bolts work too.

 

[DetroitDarin]

Got a bumper today -

Unfortunately, requires welding. Will have to find a shop to do the install.

 

[MoHawk]

My shop can install it!

 

[Mikes05expy]

Got a bumper today -

Unfortunately, requires welding. Will have to find a shop to do the install.

Nice!!!

Sent from my S5

 

[northernexp]

Does anyone know how big of a job it is to do the rear axle seals on my 01 expedition? If it's an easy job I can just do it myself but if it's a big job I may bite the bullet and pay a shop, which I hate doing but I don't have the time to fix it right now...

 

[1stGeExpedition]

Does anyone know how big of a job it is to do the rear axle seals on my 01 expedition? If it's an easy job I can just do it myself but if it's a big job I may bite the bullet and pay a shop, which I hate doing but I don't have the time to fix it right now...

Ford Rear Axle Seal Leak Repair: http://youtu.be/sWhfvTfvCGw

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[Odimus]

Changed 4 plugs...4 more to go...

 

[northernexp]

Changed 4 plugs...4 more to go...

Keep at it you will be so glad after its finished. I just wish I had the $ to do all 8 coil packs when I did mine . I only change one that was throwing a code

 

[Odimus]

Mine was just running a little rough...no codes...tomorrow the remainder. ..

 

[FordandPolaris]

Put 4 new LED's in the front. The old ones did not survive the extreme cold of last winter so I picked up some metal shelled ones hoping they work a bit better.

 

[ABU FARES saudi]

تم الإرسال من جهازي sm-n9005

 

[alaskanexpy]

Washed her all up, not bad for 16 years old and 101k miles.

 

[justin8776]

Plastidipped my rims pics coming soon hopefully after I dip my sidecladding

 

[northernexp]

Changed the rear axle seals and pinion seal, the rear pads and the 2 u joints on the first drive shaft, the 2nd ujoint was starting to make an annoying clinking sound at low speed which drove me nuts,and the inside of my rear wheels/rotors/pads were caked with diff fluid and dirt, which was also driving me nuts. Truck is happy and so am I.

Next week I'm doing the front pads, shocks all 4 corners and putting in a fresh battery. All that's left on my to do list is flush my rad, change my trans fluid &filter,front diff and transfer case and she should be good for awhile.

 

[northernexp]

I wish every chassis piece and u joints had grease nipples so I could grease everything up,to date I have the lower ball joints and idler arm and 2 u joints I can grease but the rest are still stock unfortunately

 

[DetroitDarin]

Wired fogs to OEM driving light wiring.

 

[aircargoo]

pulled off upper intake elbow off manifold and replaced with a different clean one so i can replace EGR which was impossiable to remove without breaking bolt....job done.

 

[northernexp]

Changed the shocks out, nothing fancy just Monroe matic plus large bore. Changed the front pads , the shocks lasted 339,000 kms and definitely needed to be changed.