What did you do to the expy today

[Blksmk]

Added. New tstat. To the list

 

[ManUpOrShutUp]

Added. New tstat. To the list

I recommend a Stant SuperStat. When my OEM one started to perform poorly after only 4 years, I picked up up a Motorcraft replacement from the dealer and it was about half the weight of the original. The Stant SuperStat was very beefy and has performed very well (5 years now, still going strong).

 

[Trainmaster]

it was about half the weight of the original.

Good choice. I had an original one fall apart in the block.

 

[Blksmk]

I recommend a Stant SuperStat. When my OEM one started to perform poorly after only 4 years, I picked up up a Motorcraft replacement from the dealer and it was about half the weight of the original. The Stant SuperStat was very beefy and has performed very well (5 years now, still going strong).

Thanks I'll look into it. Right now looking at a mishimoto for 90.00 cdn

 

[Aspen03]

Quick vacuum, wiped down and some spray wax to keep it looking good as I can. I'm wanting to pick up a Rupes LHR21 and give it a good polish but waiting until after I bring something else home first.

 

[tommyddsr]

Installed a new 3rd brake light. Smoke gray LED instead of factory red with bulbs.

 

[JExpedition07]

Cleaned the engine bay on my ‘07 EL now that oil pump and timing chain components job is done. All back together and running.

 

[Blksmk]

Trying to decide.

3inch cat back by magnaflo or flowmaster

Any feedback?

 

[Drae]

Uploaded a couple of videos onto YouTube for ya. My 2010 with the Flowmaster Delta Flow 40 3 inch in/out. 3 inches from the Y and stepped down to 2 1/2 after the muffler because the shop was complaining about the difficulty of 3 inches by the spare tire. You may need earphones because my phone's mic doesn't seem to pick up very loud. My 03 has the Magnaflow cat system and Magnaflow muffler 2 1/2 inch all the way. I prefer chambered mufflers so eventually the Magnaflow will go. I'll get a couple of videos tomorrow.

 

[Blksmk]

I'm seriously leaning for the magnaflo.

Think I just spent 1k lol thank you for the video

 

[SomeENG]

I made a compilation video mostly featuring The expedition on trails.


I also finished installing my mevotech front suspension and steering kit I bought, just waiting for the tires I ordered so I can have them installed and aligned.

 

[JExpedition07]

Holy cow I just realized my registration has been expired for over 2 months. In New York the State Troopers are supposed to throw you in jail for 2 weeks for driving with an expired registration. Not even kidding. Just did it on DMV website but who knows when I’ll get it with covid.

 

[mquick5]

I always re register vehicles online too. In Ohio they are not ticketing people with expired tags or liscense. My wife's dl expired last month. All BMV offices are closed here. Lots of people driving around here on expired temporary tags too.

Sent from my SM-G930T using Tapatalk

 

[JExpedition07]

I always re register vehicles online too. In Ohio they are not ticketing people with expired tags or liscense. My wife's dl expired last month. All BMV offices are closed here. Lots of people driving around here on expired temporary tags too.

Sent from my SM-G930T using Tapatalk

I supposedly can print a temp. According to NYS I’m eligible to be pulled over and get a ticket despite covid for this violation as it’s been months.

 

[Blksmk]

Got my 4600 blistien and readylift 3/2 leveling kit. Getting them installed monday.. and now it's the timing chain making noise, but it's almost brand new lol with all the new parts

 

[SomeENG]

I had my tires installed and my wheels aligned today, I didn't think to ask how much they were going to charge me so I got gouged like a mother-******. $150 to mount and balance 4 tires, swap my old spare, and a front end alignment.
The whole job took less than an hour.

 

[Blksmk]

Up here labor rate is 130 / hr. So thats not too bad..


I'm on the fence about getting

Ford Racing M-6010-M54 - Engine Block, 5.4L Production Block (5.4L)
Part #M-6010-M54

https://www.tdotperformance.ca/ford...-block-5-4l-production-block-5-4l-543163.html

2100 cdn. Thinking about building it over a year and adding the hx35 turbo to give me estimated 475+ hp.

 

[carymccarr]

I had my tires installed and my wheels aligned today, I didn't think to ask how much they were going to charge me so I got gouged like a mother-******. $150 to mount and balance 4 tires, swap my old spare, and a front end alignment.
The whole job took less than an hour.

Seems pretty reasonable to me.


Sent from my iPhone using Tapatalk

 

[JExpedition07]

Seems pretty reasonable to me.


Sent from my iPhone using Tapatalk

That’s more than reasonable for an alignment alone let alone all the extra.

 

[ManUpOrShutUp]

I'm seriously leaning for the magnaflo.

Think I just spent 1k lol thank you for the video

Amazon has had the Magnaflo down to $400 USD, but it only drops that low 1-2 times per year. Last I checked it was about $700 USD.