Recent content by af mezkin

  1. A

    03 Expy with high idle.

    Nope, but I had been TDY to Moody. I was with 653 CLSS out of Robins from 01-09 and had a few TDY's to Moody during my tenure there.
  2. A

    03 Expy with high idle.

    Thanks for the info 05expedeb. I will keep updating until this issue is solved.
  3. A

    03 Expy with high idle.

    Ok, here is some more info, after I got the previous codes I erased them. After running the Expy and trouble shooting some more with no improvement I rechecked for codes again,with no "service light" on, and no codes showed up. Not sure if the previous codes were from when I was trying to...
  4. A

    03 Expy with high idle.

    Sorry for the late reply. I have checked all hoses surrounding the TB even the elbow located behind it and no leaks. I also cleaned the MAS with no change in problem. It is not showing a service eng soon light but when I hooked the code reader this is what it showed; P2198 02 sensor signal stuck...
  5. A

    03 Expy with high idle.

    Just checked the IAC and it is GTG. That pic was taken in Ga. before we PCS'd to Italy. We are now stationed in Tx...
  6. A

    03 Expy with high idle.

    Hello everybody, Hoping someone can lend some info of what might be going on with my Expy. It has the 4.6, 2WD, with 155K; as soon as I start it up the rpms go to 2K. I already swapped out the throttle positioning sensor, and the idle air control valve with not change in problem. Any advise...
  7. A

    20" tires

    Google "tire calculator" input the original tire size and then input the tire size you want to install and it will tel you if it will work. It will also let you know if your speedo will be off.
  8. A

    What do you have done...in the inside?

    03 Expy with the following; 12" flip down screen, two 7" with DVD head rest screens for my third row occupants, one 7" screen in the center console where the coin cubby use to be, stand alone DVD/TV player, double din Kenwood receiver/DVD/IPOD/screen, 75% of interior cab with FAT MAT installed...
  9. A

    Fender vents

    Hello all, I'm planning on installing some Street Scene fender vents tomorrow. Has anybody had/has done this to there Expy? If so, do you have any tips for me before I cut a hole on the side of my fender as far as substrucutrure/ tooling goes. I'm planning of locating them 1 inch from the edge...
  10. A

    03' rear A/C question

    I changed my radiator fluid 2 years ago, I went back with what came out (the extended life fluid). I'll check around to see if tf can be flushed out and replaced. Not sure if they use the same fluid here in Europe. Thanks for the input AF
  11. A

    any lowered 2nd gen expy`s out there?

    My Expy is lowered 2" all around, I used Eibach lowering springs and anti-sway bars.
  12. A

    Painted Runing Boards

    Paint will stick to plastic, you just have to apply plastic adhesive promoter before you apply your base coat and clear coat. I painted my door panels on my 03' Expy along with my rear tail lights using the plastic adhesive promoter before I applied the base and clear coats.
  13. A

    A/C question

    Bertro, No actually my Expy is here with me in Italy....and yes I get the occasional long stare from the locals. LOL
  14. A

    03' rear A/C question

    Hello all, Here is my question for a/c experts; recently I have noticed that the air coming out of my rear vents is not as cold as the air coming from the front vents (more like cool instead of cold). I have the front and rear a/c in my Expy, I had the a/c serviced with new fresh Freon two...
  15. A

    A/C question

    Hello, This is my first post since joining, here is some quick info; I have a 03 XLT with the 4.6 (105K) 4x2 Expy. I serve in the military and currently stationed at Italy. Here is my question for a/c experts; recently I have noticed that the air coming out of my rear vents is not as cold as...
See more

Latest posts

Members online

Total: 1,740 (members: 20, guests: 1,720)

Forum statistics

Threads
53,591
Posts
502,257
Members
47,177
Latest member
HSNExped

Share this page

Top