rcab85
Member
Hey guys, I am hearing a noise from my front left tire area. Assuming its the hub... Any chance on changing them over to locking hubs?
97 wheel hubs? noise?
- Thread starter rcab85
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
tonydiv
technical advisor
Nope. No one makes an replacement locking hub for the truck.
That wheel hub is a unit that comes complete with the bearing and hub. They run about $125 or so. You need a 32mm (I think) socket to remove the axle nut. They also tend to rust in place and can require some sledgehammer time to knock it loose.
Also, if one is making noise, the other one is probably not far behind. I would do them both and take advantage of the situation to do the brakes and rotors, if you need them.
That wheel hub is a unit that comes complete with the bearing and hub. They run about $125 or so. You need a 32mm (I think) socket to remove the axle nut. They also tend to rust in place and can require some sledgehammer time to knock it loose.
Also, if one is making noise, the other one is probably not far behind. I would do them both and take advantage of the situation to do the brakes and rotors, if you need them.
We carry new wheel hubs on our website for your Ford Expidition with free shipping. Both our economy and Timken wheel hub assemblys carry a 2 year warrenty.
Here's a link to them on our website if you would like to check them out.
Ford Expedition Wheel Hub Assembly
Here's a link to them on our website if you would like to check them out.
Ford Expedition Wheel Hub Assembly
Similar threads
- Sticky
