Ahhhhhhhhh!!!! Frustrated, help please!

[panda24619]

yeah it wont. i know dude we all make mistakes. just ask before spliceing. see if he can put the factory connector back on first. and if he cant then just have him redo everything. what amp you getting?

 

[Explor2Exped]

simple answer, no

 

[ELVATO]

It's fine, CD changers are outdated anyways

 

[Explor2Exped]

yeah it wont. i know dude we all make mistakes. just ask before spliceing. see if he can put the factory connector back on first. and if he cant then just have him redo everything. what amp you getting?

I tried putting the connector back on. I'm 100% positive I wired everything back correctly. Before I was getting light to the radio but no sound, blowing each fuse I put in. Now no light but not blowing fuses. I hope I didn't fry the factory HU.

I thought since I did such a good job splicing the map light I could do the same with the new HU. F*cked everything up....

The cheapest amp on Amazon because it's what I can afford for now.
http://www.amazon.com/Pyramid-PB717X-Channel-Bridgeable-Amplifier/dp/B000E432TI/ref=sr_1_1?ie=UTF8&qid=1304384191&sr=8-1

 

[Explor2Exped]

It's fine, CD changers are outdated anyways

I dunno, I enjoyed it. Not having to scramble for cd's everytime I wanted to change one. Was worse then trying to txt and drive, hah..

 

[ELVATO]

It's called an MP3 player

Does the Kenwood have a line in input? Or a USB input?

 

[Explor2Exped]

It's called an MP3 player

Does the Kenwood have a line in input? Or a USB input?

Nah, it's nothing special.. I just bought it to power my subs. ( & match the name, hah...)

 

[panda24619]

well thats a good amp for subs. just match up power to power and ohms to ohms. need help on that heres this. http://www.the12volt.com/caraudio/woofer_configurations.asp put in the number of subs and their independence and itll tell you what amp you need. helped me out a lot.

 

[Explor2Exped]

well thats a good amp for subs. just match up power to power and ohms to ohms. need help on that heres this. http://www.the12volt.com/caraudio/woofer_configurations.asp put in the number of subs and their independence and itll tell you what amp you need. helped me out a lot.

So what your saying is that the amp I just bought might not even work with my subs???? AHHHHHHHHH!!!!????!!!??

This sucks, I cant get a break.

 

[Explor2Exped]

Subwoofer ( I have 2 of em)

* 12" Single 4 ohm Performance Series Car Subwoofer
* Power Handling:
o Peak: 1000 watts
o Max: 400 watts
o RMS: 200 watts
* Impedance: 4 ohm
* Typhoon type pearl mica polypropylene cone provides durability and stability
* Foam surround allows high amounts of excursion
* Typhoon deign trim ring
* 2-9/16" Dual 4 ohm voice coil
* 63 oz Dual magnet drive structure
* Frequency Response: 25-800 Hz
* Sensitivity: 93 dB
* Xmax: 8mm
* Mounting Depth: 5-5/16"
* Cutout Diameter: 11-1/2"

Amplifier

RMS power @ 4 ohms: 50 watts x 2
RMS power @ 2 ohms: 75 watts x 2
Maximum power output: 500 watts x 2
Input impedance/sensitivity (low-level): 10k ohms / 200 mV
Input impedance/sensitivity (high-level): 100 ohms / 5V
Signal/Noise ratio: 90 dB
THD: Less than 0.04%
Frequency response: 15-30 kHz
Dimensions: 9.84 x 10.03 x 1.96 inches (L x W x H)
Power supply voltage: 14.4V DC negative ground
Maximum current draw: 30A