Mike Wolfe
Full Access Members
Does anyone know what it takes to convert a 2018 Expy with the FX4 & tow packages to the OEM LED headlights?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
This is only a guess but you will probably have to buy the LED Headlight housings because the reflectors are going to be different than the ones in the halogen headlights.Does anyone know what it takes to convert a 2018 Expy with the FX4 & tow packages to the OEM LED headlights?
Which model do you have. I see you are in Phoenix, I live in TonopahI am going to install HIDs in the low beams and Fogs once I figure out how to do it. Looks like the entire grill has to come out!
I am going to install HIDs in the low beams and Fogs once I figure out how to do it. Looks like the entire grill has to come out!
I have a 2018 XLT. I live in Ahwatukee. Do you know how to replace the headlight bulbs???Which model do you have. I see you are in Phoenix, I live in Tonopah
It is very easy. Two screws hold the headlight housings in place. Use a 10 mm socket to remove the screws on top of the housing. The bottom is held in with spring clips. You remove the two top screws, lift the top tabs to and pull the headlight housing forward slightly. Stick your fingers in the gap between the fender and the edge of the housing and give a quick short tug to pop the spring clip, then do the same thing near the grille and then maneuver assembly tuck the outside corner in and pull the side by the grille out and the whole thing comes right out. I can pull both sides in about 5 or 6 minutes.I have a 2018 XLT. I live in Ahwatukee. Do you know how to replace the headlight bulbs???