1997SCEBFEX
Full Access Members
Hi Team!
Gen 1, 1997 Eddie Bauer Expy. Recent service was rotating tires, fuel filter, and PCV valve several weeks ago.
I turned the little knob today from 2HI to AWD/4HI/4LO and NOTHING happened, not even a click, no lights, no clunk(s), nada.
Re-read a few earlier posts from this year, but am stumped as where to start.
Fuses seem to be o.k., and haven't started chasing the vacuum lines, but am thinking the center solenoid off the front diff as a place to start, or the vacuum lines behind the battery or on the firewall. The vacuum gauge (boost) works and shows both boost and 22 inches on decel/coast etc.
Could it be a gremlin, or perhaps an easy fix? I pulled the center console and checked the pigtail to the rotator knob, however to no avail; all seems GTG.
The lights all come on when starting up, thus not the bulbs.
Any/all help certainly appreciated via the ether as I troubleshoot.
Thanks & Best,
PanHandler.
Gen 1, 1997 Eddie Bauer Expy. Recent service was rotating tires, fuel filter, and PCV valve several weeks ago.
I turned the little knob today from 2HI to AWD/4HI/4LO and NOTHING happened, not even a click, no lights, no clunk(s), nada.
Re-read a few earlier posts from this year, but am stumped as where to start.
Fuses seem to be o.k., and haven't started chasing the vacuum lines, but am thinking the center solenoid off the front diff as a place to start, or the vacuum lines behind the battery or on the firewall. The vacuum gauge (boost) works and shows both boost and 22 inches on decel/coast etc.
Could it be a gremlin, or perhaps an easy fix? I pulled the center console and checked the pigtail to the rotator knob, however to no avail; all seems GTG.
The lights all come on when starting up, thus not the bulbs.
Any/all help certainly appreciated via the ether as I troubleshoot.
Thanks & Best,
PanHandler.