Jack and Tools What are these and what am I missing? 2013 Expy XLT

[00000]

UGG THouGHt I'D WaRN Y'aLL My 2008 = 2nd owner
beautiful paint etc. lugwrench showed one complete thru crack upon examination ~ I'm 67 5-11 190 & unsure if
I did this ? Surely recommend traveling w/ a robust
floorjack - wheelchocks + more than one lugwrench Then
(weather permitting) pre valentines practice sessions w/
the fairer sex !

 

[00000]

CoMMoN Sense Rule - Don't get under any vehicle by the

side of the road (even w/ multiple jack stands etc.)

unless you absolutely have to !

 

[00000]

A FiNaL THouGHT ( HoPeFuLLy ) MiGHT WaNT To BiTe

THe BuLLeT aND uPGRaDe aLL YouR LuG NuTs = I

SPeNT HouRs ReSEaRCHiNG aND FiNaLLy SeTTLeD

oN [ FoRGeT THe BRaND ] BuT oNe PieCe MaDe iN

TaiWaN [ QuaLiTY ReaSoNs ] eBaY MuCH CHeaPeR

THaN aMZN THiS SPeCiFiC iTeM oR I'd HaVe a LiNK

oR BRaNDNaMe HaNDY ~ oF CouRSe : YMMV

 

[JamaicaJoe]

Yeah it has occurred to me to check the fit of the lug wrench on all the lugs and make sure it is solid. That said, I will pack my Craftsman breaker bar and deep socket set with the kit.

And yeah, I would not bet my life on scissor jacks. The bottle jack that comes with Gen 1 Expy's seems a lot more stout.

 

[2010-2014-only]

And a 6" extension to go between the socket and the breaker bar! Couple of 13/16" sockets in case you lose one. If corrosion gets under the "skin" of a lug-nut it will make it swell to where you cannot get a 21mm/13/16" socket on, so squirt them with Corrosion Block or similar every time you have them off.