Guys just curious, trying 2 do an SVT Thunder clone on my 2000 Expo, but it's 4WD and I've heard due to suspension setup and with the transfer case it's not possible. I've found Ground Force lowering kits, that are 2" drops in front and rear, with rear coils and front torsion bar adjusters and shocks. Stated for the 4WD model.
http://www.streetbeatcustoms.com/Gr...-Suspension-Kit-Rear-Coil-Only-_-9954/558105/
I primarily wanna do this for better handling. And 2ndary for looks, since I have a huge wheel gap. I don't wanna slam it 2 the ground by any means. And b4 I do this, I want some input if it can be done, and if it will or won't ruin the transfer case and 4WD? I'm also adding sway bars, for better handling as well. I don't need the clearance, but I do need the 4WD with the amount of snow we get in Jersey. And Turning in 4WD when it snows, is quite treacherous in this truck, always fish tails.
2000 Expedition XLT
4.6L 4WD 104K Miles
Non-Air Suspension
http://www.streetbeatcustoms.com/Gr...-Suspension-Kit-Rear-Coil-Only-_-9954/558105/
I primarily wanna do this for better handling. And 2ndary for looks, since I have a huge wheel gap. I don't wanna slam it 2 the ground by any means. And b4 I do this, I want some input if it can be done, and if it will or won't ruin the transfer case and 4WD? I'm also adding sway bars, for better handling as well. I don't need the clearance, but I do need the 4WD with the amount of snow we get in Jersey. And Turning in 4WD when it snows, is quite treacherous in this truck, always fish tails.
2000 Expedition XLT
4.6L 4WD 104K Miles
Non-Air Suspension