A
andyak
Latest activity Postings About
-
-
Aandyak replied to the thread Taking bets - lets see who wins armchair diagnosis!.Still running great today.... I wonder if there is some crud that may be moving in the VCT solenoid and causes issues sometimes....
-
Aandyak replied to the thread Taking bets - lets see who wins armchair diagnosis!.if the codes and symptoms do not return then there is not a reason to have service. The truck has been running perfect since. Hence I...
-
Aandyak reacted to mr_dave's post in the thread Taking bets - lets see who wins armchair diagnosis! with
Like.
Bad cam phaser and/or VCT solenoid. -
Aandyak posted the thread Taking bets - lets see who wins armchair diagnosis! in 4th Gen - 2018 - present.Ford dealer is at least a week out until they will even look at it - and I will wait for the codes and check engine before bringing it...
-
Aandyak replied to the thread Auto Start Stop Damage turbo's?.So if a person disables autostart and adds bambi mode in forscan are you saying ford extended service contract will deny paying for...
-
Aandyak reacted to Mr Big's post in the thread Installed a Motorola MA1 Wireless Car Adapter for Android Auto with Like.
I thought I would share this in case others were thinking about adding wireless Android Auto to their Sync 3.* system. I looked at many...
-
AAsk the dealer to see the Smart Vincent report for the vehicle you are considering purchasing. It not only documents every rebate that...
-
AThis is really frustrating because this could be done with just software, no additional HW expense per vehicle.
-
Aandyak reacted to HILLY's post in the thread trans cooler - replace oem - anyone done this? with Like.
A transmission can be run without running through a heat exchanger. The purpose of a HX is to get the trans up to an operating...
-
Aandyak posted the thread trans cooler - replace oem - anyone done this? in 4th Gen - 2018 - present.Just saw this guy do the upgrade on his truck: https://www.youtube.com/watch?v=BSXYHOBAXTM so manifold fitting...
-
Aandyak reacted to Soliyou's post in the thread 10R80 Fluid Change Project Creep, New PPE pan. with Like.
These pans are still very expensive but pretty cool! I still have couple of other upgrades before this one. By the way, I always...
-
Aandyak replied to the thread PPE aftermarket transmission oil pan.Did you reuse oem bolts? if so, what torque... I read this on F150 forum " Well this is certainly a fun project. I would have gotten...
-
AYes, we did.
-
Aandyak replied to the thread 10R80 Fluid Change Project Creep, New PPE pan..Did you reuse the stock bolts on the pan and torque to the higher value specified for the new pan? F150 forum read a guy broke bolt at...
-
Aandyak replied to the thread PPE aftermarket transmission oil pan.also, I believe this is the correct part that has enough internal clearance not to hit the pump housing...
-
-
Loading…
-
Loading…
