Recent content by chris451fmc

  1. C

    USB ports next to phone charger not working

    While troubleshooting my sync 1.1 (removed and opened up )for non working problem I found on the APIM board a chip that detects overcurrent and has a dc switch (500ma max) so this is a software controlled thing. If it detects overcurrent the CPU will switch off the port(S). 1.1 has one port...
  2. C

    Blower motor questions

    I have the 2017 Expedition with tow package and 4x4. The blower some times will not come on. I can stop, go to the passenger side and wiggle the wires under the kick panel and it will start going again. So there is a bad connection there. I have an IR camera and I could see the two large wires...
  3. C

    2016/third gen electrical gremlins - SYNC, Backup camera, blower motor

    I have noticed the backup camera had distortion or very bad video when it was -10F degrees and the vehicle was parked in the cold. This cleared up as the weather warmed up and after driving for a half hour. Cold temperature seems to cause the problem. I have not opened up the tail to check the...
  4. C

    2016/third gen electrical gremlins - SYNC, Backup camera, blower motor

  5. C

    Sync module location in a 2017

    THis 2017 4x4 had a working sync module that paired with phones and transmitted on bluetooth. One day it went dead. The display will not respond when the phone button is pressed, as if the module is missing. The dealer tried to reflash the sync via USB but that did nothing and there is no charge...
See more

Latest posts

Staff online

Members online

Total: 1,635 (members: 34, guests: 1,601)

Forum statistics

Threads
53,666
Posts
502,868
Members
47,287
Latest member
hot_fig

Share this page

Top