JasonH
Reaction score
480

Latest activity Postings About

    • JasonH
      JasonH replied to the thread Drivetrain noise or tires?.
      I had this issue recently. It was a wheel bearing. Trying pulling off the tire and rotating by hand. If you feel any binding or...
    • JasonH
      JasonH replied to the thread 2013 Turn Signal Flasher.
      Disabling the outage setting for the rear lamp should have fixed the hyperflash. Can you post a screen shot of the setting you changed?
    • JasonH
      JasonH replied to the thread 2013 Turn Signal Flasher.
      It's possible it was added after the 2013 model year, or it could be tied to another module. I suggest checking to see if any earlier...
    • JasonH
      Wanted to post an update for anyone searching in the future. I replaced my driver's side bearing, but it turned out that the issue was...
    • JasonH
      JasonH replied to the thread 2013 Turn Signal Flasher.
      It's in the BCM tab on the sheet I linked above, under exterior lighting. I think it's the 726-28-01 rear outage off setting. it's been...
    • JasonH
      JasonH replied to the thread 2013 Turn Signal Flasher.
      Try this link: https://docs.google.com/spreadsheets/d/1uDSQ1Z5a2Wt8-kjrSiVSlDFGFHnfeuhb3RTMVz95730/htmlview#
    • JasonH
      JasonH replied to the thread Updating my sloppy suspension.
      Check your control arm bushings. If they are worn replacing the other parts will provide an underwhelming result. Since the vehicle is a...
    • JasonH
      JasonH replied to the thread Factory Rear Locker addition?.
      Mine doesn't have the LSD. You are correct regarding the 3rd gen being mechanical, not electronic. I think the OEM Ford is a mechanical...
    • JasonH
      I had a similar issue and it resolved itself, but I never figured out why. Check remaining oil life and battery charge level.
    • JasonH
      JasonH reacted to techdude99's post in the thread Pressure Way Off Towing With One Tire with Like Like.
      I took a pic before I left and posted it below. All tires set to 51 PSI before leaving MS. Tongue was between 700-800 lbs according to...
    • JasonH
      Here's a video I watched previously that shows what's involved in replacing the manifold. https://www.youtube.com/watch?v=3r9-UT_3kyY&...
    • JasonH
      My understanding from what I've read is that there are three stud locations that the OEM manifold did not employ as clamping points in...
    • JasonH
      What are the GVWR and GCWR on your door sticker? Your trailer tongue should be between 520 and 780. Your tires should be ok, but that...
    • JasonH
      JasonH replied to the thread Factory Rear Locker addition?.
      Nearly anything is possible with sufficient funding. I think what you're really asking is whether it is cost effective to install the...
    • JasonH
      JasonH replied to the thread Front Wheel Bearings / Hub Assy.
      Try Rockauto. They usually have a good selection of parts.
  • Loading…
  • Loading…
Top