In this day in age, gas prices are so high, I might as well just buy a bike or just walk to where ever I was going. If there is anything you can do to your Expy to save gas prices, please post them. Thanks!
I have a Ford factory hitch on my Expy and its a Ford 7RV blade on my outlet. I am using a 7RV to 4 pin adaptor connector and the brake and blinker lights work but the running lights dont work on the trailer. Im thinking its a blown fuse. I looked on the Ford fuse diagram and doesnt tell me...
It all depends on which motor is in the truck, the 4.6's had coil packs and the 5.4's had coil-on-plugs. Usually the white milky substance under the cap is moisture from cold weather. I know there are several others that have thought the same thing thinking its the head gasket but its not...
If the flasher relay is anything like the other expeditions from 03-06 it would be on the underside of the driver's side on the right side like halfway up the dash. There should be a little box with a cover on it, the best way is to turn on your turn signal and feel for the ticks. But I had...
Ok so I pulled the COPs on the side where the thermostat was...all are dry. One thing I found very peculiar was that the top of the #4 COP and connector were covered in antifreeze. Completely opposite side of the thermostat. I found that the hose with the T-split in it has a hole in it...
Thx guys, these are relatively new COPs...but I would have to wait till Friday to get them changed out and I have to coach my kids football so I cant really wait around to get them fixed :)
I decided to change my thermostat cause it was stuck open, so I changed it and now I have a flashing CEL and sounds like it is missing. I think I may have got the COPs wet, is there any way to rectify this? thanks!
I have a broken parking brake cable, it may be the front cable that snapped but I have been noticing a slight drag on my Expy, my thought that it may be that the parking brake is slightly engaged thats causing this drag. Is there any way of disengaging the parking brake by the equalizer (the...
Thanks man, I just wanted a base reading to see if it was below 12volts. I find it awfully weird that it would run at 13.5 volts and when I ramped the rpms, it hardly moved. When I turned on the lights, it would drop to 12.8v....Im thinking it may be a bad voltage regulator but the battery...
I have the stock encloure in mine with and aftermarket Lanzer 8"...seems to work fine and puts out good bass. But the real question is.....can you hook up the factory amp to run that woofer? I have a small amp pushing it right now but would like to put back in my stock deck.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.