-
-
Nnaslime replied to the thread CCD OR NOT????.Interesting. Will reflashing a tune reset it as well (I believe it resets the transmission)? Will look into forscan.
-
Nnaslime replied to the thread CCD OR NOT????.Do you have any pictures? I do have the CCD but unfortunately the ride is getting wobbly. I purchased Bilsteins and will be swapping...
-
N@stockfritz2019 I used the bilstein 5100's at the stock height setting. I really liked them, made a huge difference over stock.
-
Nnaslime reacted to Logan97's post in the thread Bilstein 4600 front spring seats problem 2012 XL stock height with
Like.
As far as I know it's just the fronts with this issue. -
Nnaslime replied to the thread Bilstein 4600 front spring seats problem 2012 XL stock height.Would you need 4 of these (front n back)? Or do the spring seats on the rear shocks come off, and you only need two for the front?
-
Nnaslime reacted to mjp2's post in the thread Bilstein 4600 front spring seats problem 2012 XL stock height with Like.
Order Motorcraft ASH24732 from rockauto for $35 each and scrounge what you need. Cut off the end with the mounting eye and bushing and...
-
Nnaslime replied to the thread Correct Bilstein Part numbers for 5100 Kit for 2020 Expedition.I purchased the off-road research module and 5100’s, only to be told by a shop today that the spring seats on the ccd shocks are welded...
-
Nnaslime replied to the thread Bilstein 5100 and Spring Seat part.What about the seat on the CCD suspension? I was told today that they are welded on ccd shocks. Can someone confirm this? 2019 Platinum.
-
-
Loading…
-
Loading…
