-
-
SAppreciate the concern, but these are common brake system unions, designed for this specific use. If I had used brass compression...
-
Ssjwelds replied to the thread Brake line mods for strut spacers.Ok. I'm not sure if a brass fitting is rated for the pressure that a brake system might see. Would hate for you to have a panic stop...
-
Ssjwelds replied to the thread Brake line mods for strut spacers.Is that a brass fitting?
-
SIf I put wheels and tires from a 2018 expedition on my 2012 expedition, can the TPMS sensors be made to read properly, or are they a...
-
SThanks everyone. After driving around Arches yesterday we got the opportunity to seek out dirt today. We hit Fisher Towers and for...
-
Ssjwelds replied to the thread RockAuto.com Discount Code - Expires August 11, 2022.It does. Or, you could laugh about it and move on.
-
Ssjwelds replied to the thread Converting Expy to a hunting camper - idler wheels.If you look at pictures of a rear hub assembly, it looks like it's a contained unit that doesn't need the axle shaft to hold it all...
-
Ssjwelds replied to the thread Converting Expy to a hunting camper - idler wheels.He wants to make a towable camper, the way I understand it. Remove axles, diffs, drive line etc and tow it I don't think the axle...
-
SI ordered this MOTORCRAFT ASH24732 from rockauto.com and used the lower spring perches and they fit just fine on the Bilstein 4600. Here...
-
SHey everyone, a few weeks ago I picked up a used 2016 SSV that was a former highway patrol admin/commanders car. I’m enjoying this one...
-
Ssjwelds replied to the thread Lower Spring Perches.I'm in the same boat. Some previous owner put a Monroe quick strut on ONE SIDE in the rear, so now I'd have to buy a complete assembly...
-
Ssjwelds replied to the thread Lower Spring Perchees.But what if a person needs all the upper mounts as well?
-
Ssjwelds replied to the thread 2012 XLT EL, HD tow package, 3.73 axle, weight distributing hitch and 7000# camper questions.Should be fine. Transmission is probably least of your worries. It's the same trans they put behind the Ecoboost and it holds up fine .
-
Ssjwelds replied to the thread Lower Spring Perches.Side note: how did/do you like the KYB's?
-
Ssjwelds replied to the thread Interesting Lift Idea Rough Country/Ready Lift.I wouldn't. Too much angle on A-arms and other components.
-
-
Loading…
-
Loading…
Members online
- apex96
- JohnSC
- matsuno shuhei
- steve3591
- Black bus
- ziggyzag420
- krifenbu
- rjrodney
- rd618
- pickles1107
- LazSlate
- Mothnuts
- kgoff
- JasonH
- Aaron Buchanan
- lptexastornado
- bond9002
- bman440440
- vincentrose
- peoples1234
- BASell
- grwilson
- justinp16ex
- PensFan
- doubleeagle45
- Khan1013
- USKflt
- dlcorbett
- 1Dippin
- rbeauch
- Dustbunny
- jafetica
- Scottorama
- sjwelds
- mmoran33