thanks for the information. I opened the engine and besides the left tensioner, one of the plastic guides broke. so I need to drop the oil pan too.
Besides Motorcraft, is cloyes a good brand? it appeared on one of my searches on partsgeek.com
Good day,
I found this site that contains various pieces of information for my Ford (expy 2010) as well as many more years and vehicle brands.
I compared this to the CHARM project and they seem to be the same people (but not 100% sure).
Perhaps some forum admin can make this weblink on some...
Good day,
These codes seem related to the ABS sensor. Which I am unable to diagnose where I live.
I changed the ABS sensors for the rear wheels as the cables were damaged. But these codes also indicate a failure of the ABS module, which I am not sure how to locate/buy
Included is the diagram for...
Well, it is fixed. About two hours of work mainly because the Mechanic has never performed such fix.
A local mechanic was able to remove the fill neck and replace the broken spring.
Update: I think this is my only option. The youtube video is for an Explorer, but it looks like the same symptoms.
P0456 CAPLESS FILLER NECK REPLACEMENT 2010 Ford Explorer f150 f250 fuel
Hi Expy owners,
as you can see from these photos, I cannot put gas in the tank due to that filler-thing cap being broken/wrong position. Which I think is the reason behind DTC codes P0455, P0457.
What is the name of such part? can it be replaced?
I dont have the ford plastic fuel adaptor...
Good day,
my 2010 started to experience a "rattle-ish" start but only when it has been parked for a whole day. After that first "noisy" start, it does not happen again. I will say that it sounds like no oil is there and thing start dry, which leads to a rough start.
my vehicle has 195 thousand...
Yesterday I had the car interior cleaned profesionaly. Today the engine light turned on and I got this code u2013 the compass module is not responding.
Then it goes crazy beeping.
Any ideas about how to fix that? or what fuse in the fuse box relates to the compass so at least I can turn it off...
A few photos now that I have removed the steering wheel and column. The second photo shows the ball bearing that is damaged causing the main steering column to make a grinding noise and also making the steering wheel column have room to move around.
So it looks like I am referring to the Steering column part number 2L1Z-3C529-GA which is discontinued. Something inside of it has a bearing and that bearing is damaged.
Good Day,
Attached is an image I am trying to look for a part number (the one pointing with the green arrow).
My steering wheel makes a grinding noise while turning and I see small metal pellets on the driver-side floor. Like when a bearing broke.
An image is attached here for reference.
Is it a...
The 10mm bolts used for the oil pump (set of three) to secure the oil pump to the engine, do you know where can I get them or a part number?
Ford Expedition 2005 5.4L with a 340HV Melling pump.
Hi @Hamfisted . To my knowledge, transmission oil has never changed. I noticed that when I jack up the vehicle to do some other mechanical stuff. I don't think is a hassle to change the trans oil and filter since I already doing so many other things to the vehicle. The oil is dark red (more dark...
Hey there! Continuing my journey to DIY chain tensioner replacement (thanks to ford makuloco), I was also checking many things underneath the vehicle. And I found there is a leak on this metal tube, passenger side, right above the transmission pan. Do I need to replace the tube or is there a...
Any ideas on where can I get the rubber seal that goes in the transmission bell?
BTW proper credits: the picture belongs to a screen capture of a Makuloco video. So I don't have to go under the car.
I am changing the roller arms on the Expy (using Melling rollers) and I had an extremely hard time removing the passenger valve cover. Mainly because I was not able to lift the valve cover enough to pull it out. And it was because of the two hoses in the back to the right of the valve cover.
I...
yesterday after I turned on the AC a white vapor/smoke/gas? started to come out from below the right of the engine. It was not the engine oil, transmission oil, no coolant, no brake fluids. A friend said something about the AC compressor being "blown" and the white vapor/smoke/gas was the oil...
Good evening.
I am about to change Front/rear wheel bearings and hubs and Front brake rotors. Is there a place where I can get/buy a document with the torque specs?
Expy 2005 EB 5.4L
thanks,
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.