Search results

  1. C

    Miss- then no miss?

    Ok my Expy is 98 with 4.6 with 180,000 When I bought it the back passenger cylinder was missing. I replaced coils (this is not the ones with one per plug setup) wires and plugs and it ran like a champ. I recently took it on its first extended trip. I pulled a trailer (small open one) 400 miles...
  2. C

    feel follish asking-oil filter

    feel foolish asking-oil filter I been tinkering with my Expy for about a year, and its time for an oil change (dont get to excited, was suposed to be done when i got it). I noticed when i was working on the exhuast manifold there was an oil filter in the drivers side front fender behindthe...
  3. C

    small clunk in front end

    98 expy, when i go around a corner and hit any kind of bump i sometime hear a small clunk. I dont think its CV joints as the standard sharp corners in forward and reverse to test produce no noise.. you need to hit some kind of bump. Bearings.. again doubtfull this is not a huge clunk.. but a...
  4. C

    Heater-knob not changing where it comes out

    I hate to start a new thread here as thre are lots on heaters. But Im still kinda confused. My heat works fine, blows hot. My issue is it seems when i change from floor to defrost all is good, but most other settings dont work (or rarely do) the defrost/floor blend does only defrost, etcc.. I...
  5. C

    EGR Tube

    my 98 4.6 has a rusty pipe from the drivers side exhuast manifold up to the throttle body.. Im assuming htei is EGR related as i can find pipe on ebay that appear to fit this discripton. Anybody replaced one of these? The nut is fairly large but extreally rusty on the exhaust side.. Im thinking...
  6. C

    cruise control light

    Is there a light int he dash that indicates the Cruise control is on? 98 expedition. My cruise works, but no light and Im used to seeing them.. if there is one, where is it i cant see a spot.
  7. C

    mirrors dont work

    Ok, my mirrors dont work, the swtich lights up (at night) anybody have any advice? I would say a bad switch if some firections worked, but they do not work at all. Are there any connections that have issues? Any advice?

Latest posts

Members online

Total: 2,205 (members: 7, guests: 2,198)

Forum statistics

Threads
57,019
Posts
535,925
Members
54,719
Latest member
jtebbe0529

Share this page

Top