Search results

  1. SkyJumper

    03-06 strutmasters conversion

    That is correct, you do not have to unplug anything nor anything else if you do not want to, but to disable the msg center for the air ride only as stated before, you need to know what color code and wire number in the pig tail that plugs into the control unit, and pull it out or cut it.
  2. SkyJumper

    03-06 strutmasters conversion

    Yes really, the onboard msg center will be disabled if you locate the single wire in the air ride control box. Once you locate that wire, then pull it out of the pigtail, and plug the harness back in. And then the signal for the air ride will be disabled. I just can not tell you on this...
  3. SkyJumper

    03-06 strutmasters conversion

    All you need is a schematic of the onboard air-ride control box harness. All you need to do is pull one wire out of the harness plug that plugs into the control box. The pin number or wire color I do not know but I am sure it is available thru google or here. Had to do the same very thing to...
  4. SkyJumper

    Lifting - I need wider Upper Control Arms - Where?

    I do not know what you are asking with wider arms. The lift kits use drop brackets and OEM aftermarket arms (if included or needed) to achieve lift. The arms are not wider as if they were, you would have to modify your mounting points to the frame and or lower stock or drop brackets. I have...
  5. SkyJumper

    New 2 me 1999 Ex 4x4

    Well here is the pics of the EX, the only blemish on the interior is the driver airbag has a couple of chips of the paint and the black is visible. Other than that, the interior is mint as new,.....
  6. SkyJumper

    Console

    The mounting for that console should be the same for the 98 thru 00 other than a trim level or the actual design of the storage and cup size. But the mounting on the floor pan should be identical and the other issue will be the slope factor at the joint of the console and dash. The dash may be...
  7. SkyJumper

    New 2 me 1999 Ex 4x4

    Well the only concerns I have without the parts in hand that was ordered is the clearance of the 305/70's with 16x10's, B/S is at 4". I hope not to do any trim or what not. Hopefully the E-Bay 3/2 lift kit I bought will be adequate to allow for that combo without any rubbing. Offroad will not be...
  8. SkyJumper

    Just another guy from SW Fla

    Thanks all, Cape Coral Florida is where I am located. About 30 miles N of Naples
  9. SkyJumper

    New 2 me 1999 Ex 4x4

    Pictures after work today.
  10. SkyJumper

    Just another guy from SW Fla

    Hey all, new to the site, and just purchased a 99 Ex XLT 4x4. And already started a build thread over on the 1st Gen forum. http://www.fordexpeditionforum.com/showthread.php?t=13627 Look forward to much more in the future with you all.
  11. SkyJumper

    New 2 me 1999 Ex 4x4

    I do not think it is all that bad either but preference would of been the 5.4. I have the 4.6 in my Mark VIII, and my Mustang, but two different worlds of the 4.6 when it comes to performance. I just filled the tank all of $87.00 worth, and see what kind of mileage I will see. And after all the...
  12. SkyJumper

    New 2 me 1999 Ex 4x4

    1999 Ex 4x4 build thread w/pics Let me introduce myself, I am Bill a disabled Airborne Army Vet, I am not new to the forum world as I am a MOD on another site and Lifetime member on others. So reading and searching is the norm with me, so no need for a NOOB banner, HAHA. Well, I just...
View older results

Latest posts

Members online

Total: 2,276 (members: 5, guests: 2,271)

Forum statistics

Threads
57,019
Posts
535,925
Members
54,719
Latest member
jtebbe0529

Share this page

Top