Search results

  1. Spooky

    Gibson 619999 Stainless Steel Exhaust NIB (2004 Expy)

    I have a Gibson 619999 Stainless Steel Exhaust NIB. Bought it years ago and never installed it (or opened the box). Since I've upgraded to a '22 Raptor, I don't need it. Asking $400, buyer pays shipping. Located in 20165. GIBSON Fits 2004 Expy. Tubing Diameter: 2.50-in. Stainless mandrel bent...
  2. Spooky

    2015 Ford Expedition wheels

    I just put 2015 F150 wheels onto my Expy and had to use an angle grinder to cut about an inch off of the axle like Buck did. It was easy and took all of 20 minutes for both sides.....
  3. Spooky

    How do I fix this??

    That could be a great resource if it works. I had the rear defrost tab pop off on my old Crown Vic and I couldn't find a product that worked. The only other option was to replace the rear window.....needless to say, that tab dangled for a while....
  4. Spooky

    Scored some F150 wheels

    I think anytime you lift the Expedition, especially the 2/3 lifts, it alters the geometry of the rear axle a bit. The picture accentuates it. It doesn't look as bad in person....
  5. Spooky

    Scored some F150 wheels

    I purchased a milwaukee 4.5" grinder and took off about 1/2" of the axle nub from each of the rear axles. The grinder made short work of them and I was able to get the cut portion of the axle flat so it doesn't look like chit. Before: IMG_2252 by Spooky posted May 23, 2017 at 4:12 PM After...
  6. Spooky

    Scored some F150 wheels

    After much deliberation and searching, I found some cherry 18" wheels off of a 2015 F150 that I love ($350 shipped). I going to get them mounted and some new tires slapped on them as soon as I figure out how I am going to trim the rear CV axle to fit the F150 FORD wheel cap. Any ideas how I...
  7. Spooky

    AP Racing 6 piston front brake kit 2003-06

    Shoot me pics. I'm very interested......
  8. Spooky

    AP Racing 6 piston front brake kit 2003-06

    Is this kit still available?
  9. Spooky

    2006 Expedition - HID Headlights with Angel Eyes?

    I had smoked headlights on my other car. The cut the visible light by almost half. I'll never do that again......
  10. Spooky

    2006 Expedition front blend door motor

    YH-1744 was the correct p/n for the front blend door actuator for my 2004 Expy.
  11. Spooky

    2006 Expedition - HID Headlights with Angel Eyes?

    I purchased the Spyder Angel Eyes housings recently due to the fact that my HIDs had way too much light spill and were probably blinding people. They are good quality and have so far preformed great. Spyder states that they will not accept HID bulbs, but my 9007 HID bulbs fit fine. The...
  12. Spooky

    2004 Expy having weird A/C issue

    FYI, YH-1744 was the correct p/n for the front blend door. Hopefully this will fix the issue
  13. Spooky

    2004 Expy having weird A/C issue

    So basically, even when I have the A/C or heat off, I still get a bit of either hot or cold air through my vents depending on how I have the temp set. Not a lot, mind you, but enough to notice. I figure it's the front blend door. Has anyone had this issue? Is YH-1767 the correct part number...
  14. Spooky

    2006 Expedition front blend door motor

    Sorry to bring this back to life, but does anyone have a part number for the front blend door actuator? I found YH-1767, but wanted to confirm as I need to change it this weekend.
  15. Spooky

    2nd Gen Expy.....what size tire increase?

    Hey guys, I'm looking to get a set of 2014 Raptor SVT wheels with 315/70/17 tires and I was wondering if they will even fit? I'm currently running a 2.5" front and 1" rear level/lift. It LOOKS like they will fit, but I don't want any rubbing issues. Does anyone currently run a similar set up...
  16. Spooky

    Rear camera install

    I ran mine through the plastic running on the Driver's side. It was by far the easiest route. Plenty of space to get my hands in there and run the cable.
  17. Spooky

    iPad Mini playing on overhead DVD system

    Yeah, I'm in the same boat. The new lightning plug won't do digital video........FML
  18. Spooky

    4.6 throttle body choice "if" you had one

    Not sure why you couldn't run a TB from 4.6 Mustang.......Accufab and BBK come to mind.
  19. Spooky

    What did you do to the expy today

    Installed a Volant Cold Air Intake and finally fixed the broken fastener that held my wiper cowl on. At highway speeds, it would rattle and drive me crazy.
  20. Spooky

    New custom valve body

    I just checked my emails and I paid $250 for the complete 'drop in' VB. I went this route instead of just doing the plate with the modifications because there are 2 (if memory serves) springs that can be replaced to help shifting and I didn't want to mess around with all of the springs and balls.
  21. Spooky

    New custom valve body

    The new VB is holding strong. The shifts are quick and there is a SOTP increase in pick up. Probably due to it shifting quick and actually getting up to speed quicker. The best part is getting rid of the Neutral to Reverse lag. I hated that with a passion! I'll look up what I spent and post...
  22. Spooky

    What do you guys think of this cold air intake?

    I like that design, I might have to pick up the 2004 model.......
  23. Spooky

    cruise control not working. please help.

    I replaced a sensor on the brake pedal assembly that fixed my Cruise Control issue. It was like $10
  24. Spooky

    Ordered my new bumper

    That bumper rocks! 100 lbs of extra weight up front though. I may have to consider one.
  25. Spooky

    bubbling on paint

    I noticed some bubbling on the inside of my rear cargo hatch. I just assumed that it was from the environment (former NY State Expy) and salt on the roads in winter.

Latest posts

Members online

Total: 1,665 (members: 18, guests: 1,647)

Forum statistics

Threads
53,629
Posts
502,565
Members
47,233
Latest member
SwampRod

Share this page

Top