I did not replace the fuel filter prior to replacing the fuel pump. I probably should have tried that first. It could have saved me an hour of work... I picked up another Delphi pump, AA just swapped it out at the store with the same model. It was a fun project and the weather was good.
Update,
I pulled the replacement Delphi Pump that I purchased at Advanced Auto and swapped it for another new pump assembly. I also picked up a new Fuel Filter. Finished the work this afternoon and the Expy runs perfect. The AA employee that I spoke with is ASE certified mechanic, he said...
Update,
I pulled the replacement Delphi Pump that I purchased at Advanced Auto and swapped it for another new pump assembly. I also picked up a new Fuel Filter. Finished the work this afternoon and the Expy runs perfect. The AA employee that I spoke with is ASE certified mechanic, he said...
I replaced the fuel filter 12-18 months ago. I use my Expedition for hunting and snowy driving, I probably put on 4-5000 miles a year. I'd be shocked if the fuel filter is clogged after 8-10k miles. I could be wrong. I started noticing start up issues 1 or 2 times a week. Wouldn't start on...
HI all,
2002 Expedition 5.4L. I just replaced the Fuel Pump with a new Delphi fuel pump assembly. It went relatively smooth with the exception of a couple electrical connectors were difficult to disconnect.
Steps to replace fuel pump.
1. Disconnected battery
2. Disconnect filler neck hose and...
HI all,
2002 Expedition 5.4L. I just replaced the Fuel Pump with a new Delphi fuel pump assembly. It went relatively smooth with the exception of a couple electrical connectors were difficult to disconnect.
Steps to replace fuel pump.
1. Disconnected battery
2. Disconnect filler neck...
I need some help. Exped has A4WD, 4H and 4L. A few weeks back I started to hear a rhythmic front end wum wum wum wum noise. Sounds like its a grinding/rubbing noise. I checked both front calipers to see if one froze and keeping the brakes engaged, I was able to compress caliper pistons. Not...
Solved.. After finding some info online from owners with same problem they suggested swapping switch to rule this problem out. I swapped to passenger PDL switch to drive door. It works fine now. When pressing the U down it was soft feeling versus pressing L it was firm and sprung back into...
Hello All
This morning I tried the incorrect code on my Expo key pad multiple times. I guess old age/concussions have caught up to me... After a few minutes I remembered the correct code and was able to unlock doors. Now my power door locks will not unlock when pressing U on driver/passenger...
I got under my expy and I was able to twist the front drive shaft back and fourth. Forgive me for my ignorance, should it be able to rotate clockwise/counter clockwise with Expy not started? I shook it at the front U joint, no wobble or play in u joint. The rear drive shaft was rock solid, no...
Hello All
Sorry for the delay in replying back. I pulled the 4wd Fuse, and the vibration has gone away. So i am guessing it has something to do with that. Where do i go from here? Do you have any recommendations on where to start looking? Thanks so much
I need some help. I have been experiencing rough idle and slight smell of gas. I also experience vibration/bucking between 30-40 mph... I put a scanner on it and got code 1450 "Inability of Evaporative Emission Control System to Bleed Fuel Tank". Forgive my ignorance, would this cause rough...
I'm not getting a CEL. I failed to mention that I have a rough idle at stop lights.. I will check the hoses to see if I have a vacuum leak. I will also check to see if i have a bad ignition coil or boots. I had the plugs replaced 6k miles ago. I really appreciate your input, will keep you...
It doesn't seem to me like its the suspension. Yes I can feel the vibration through the pedal on acceleration. I will pull the 4wd fuse tomorrow morning and check for the vibration. If that fixes the problem should I focus on the drive shaft?
I started to notice vibration coming from the front of my expy between 30-40 mph or when the engine is under load going up medium inclines. The harder I accelerate the more pronounced the vibration feels. When I accelerate slowly I don't feel anything. Once i get up to speed on the highway it...
I started to notice vibration coming from the front of my expy between 30-40 mph or when the engine is under load going up medium inclines. The harder I accelerate the more pronounced the vibration feels. When i accelerate slowly I don't feel anything. Once i get up to speed on the highway it...
I called Ford this morning, the bottom bolt is a 13mm stud bolt. My local ford dealer can order it at a cost of $30. $30 for a bolt?? The wire that attaches to the bottom bolt is the ground wire. I decided to ground that wire to the middle of the 3 retaining bolts this morning. I...
I need your help... So i just replaced my starter on my 99 expedition. The top bolt was a BEAR. So when took out the bottom mounting bolt it was a bit odd. It is threaded on both sides. So first i had to take the nut and wire off, I assume was the ground wire but not sure. Next I took out...
Lane, thanks for replying. I took a look at your link, it was well written and helpful. I will definitely check the elbow behind the rear of the intake. Thanks again..
I have had rough idle problems and CEL came on. Took it to Advanced Auto and had them pull the codes. I got P1405 P1406 P0171 P0174. After looking at the PCV elbows i realized they were cracked, I replaced all the elbows I could reach. I did not check the elbow behind the TB. I checked the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.