brakes

  1. E

    2019 Rear Caliper Piston EXPY Platinum

    Hi all, Changing my brakes has been an experience since its the first time I have ever one it. I am having a beaver of a time getting my rear caliper pistons retracted. I put it into brake maintenance mode before starting but the brake kit that I have does not have a three pin disc plate that...
    • Expy7
    • Thread
    • 2018-2020 expedition brakes 2019 expedition rear brakes brakes caliper piston rear brake
    • Replies: 6
    • Forum: 4th Gen - 2018 - 2024
  2. K

    2005 Eddie Bauer Booster Check Valve

    Hey All, I have a 2005 Eddie Bauer with AdvanceTrac My issue is very weak braking power when first pushing the pedal. If I leave my foot on it for a second and push further, it grabs nicely. Pedal is very firm with engine off so I believe this to be a vacuum issue. I'm seeing no vacuum from...
  3. C

    2009 Expedition Brake lights not working!!

    Hello all I just noticed that my brake lights are not working. My running lights and turn signals work, however, the brake lights are non existent. Any ideas or common issues? Thanks, Chris
  4. Eightiesrock80

    BEST MASTER CYLINDER OUT THERE????

    I want to put on a new master cylinder but it looks like there’s no motorcrafts left for my 2003 Expy what are all of you having the best luck with out there.
  5. MBohn

    Big Brake Kits?

    So my 2015 Expy has nice 20" wheels on it, but I love the way the Platinum's 22" size looks. I have a buddy that owns a wheel shop, and can get reps of my wheels and have them powdercoated in the colors mine currently are. So, one thing I hate, is larger sized wheels with tiny brakes behind...
  6. M

    Uneven brake pad wear

    Front brake pads have uneven wear. Left front is 4 mm; Right front is 9 mm. Clean and grease the caliper pins, or replace the Left front caliper? If you replace one caliper should you replace the opposite caliper at the same time? 2009 Expedition with 214k miles.
  7. U

    Replaced pads and rotors, brake pedal sinking to floor now?!?

    I just installed a Powerstop Z36 on my 2015 XL and I cannot get the brake pedal to stop sinking to the floor. I didn't crack the system at all, just retracted the pistons with channel locks (bleeders closed) and replaced everything as normal. As soon as I went to test the truck out, the pedal...
  8. Tocs

    Brake problems

    My brake pedal is hard till you start the truck then it goes right to the floor. I have bleed it several times. I replaced the brake booster and master cylinder. It is not losing fluid. Just stumped.
  9. J

    2012 Expedition XLT EL "Service AdvanceTrac" and ABS lights on

    I have a 2012 Expedition XLT EL. The other day the "Service Advancetrac" warning appeared on the instrument panel readout and the ABS lights came on also. Then, for a brief second, I lost brakes. Then, the brakes started working again, but the lights stayed on. Later, after having been parked...
  10. C

    New Expedition with trailer brake controller problems - Help

    First post here - I'm looking for some help. Last week I purchased a new 2019 Expedition Max Platinum with Heavy-Duty Trailer Towing Package. Currently getting no power to the 12v lead or the trailer brakes. Anytime I squeeze the brake controller the Expedition screen reads, "trailer...
  11. T

    1999 Expedition Brakes

    How do you replace the right brake caliper line?
  12. plumcolr

    2017 brakes

    I have a new-to-me 2017, bought in April. It has just about 50000 miles. When I rotated the tires, I noticed the front brakes had been recently done, pads and rotors. The rears were original. However on looking at the rears I noticed the inner pads were almost like new, while the outer ones...
  13. fidget247

    Brake failure / Master Cylinder/Booster '16 Expy

    Hi friends. I had a complete failure of the gasket between the Mastery Cylinder and Brake Booster yesterday. Gratefully, the car was stopped when it happened. Being repaired at the ford dealer now. I have read that 2015 F-150s with EcoBoost were recalled for this part failure, but not so...

Latest posts

Members online

Total: 1,967 (members: 23, guests: 1,944)

Forum statistics

Threads
53,577
Posts
502,120
Members
47,137
Latest member
lucedio

Share this page

Top