110 Octane Racing Fuel

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sgt Darkness

Full Access Members
Joined
Oct 24, 2018
Posts
359
Reaction score
98
Location
East Tennessee
Anybody ever tried using 110 oval track racing gasoline? What’s the highest octane fuel you have ever used? Will our Expy’s run ok on non-ethanol fuel, for the 3.5TT engine?
 

Black

Full Access Members
Joined
Mar 26, 2018
Posts
1,376
Reaction score
640
Location
Kentucky
Like any motor it will run far better with no ethanol.
Without a tune for 110 you are just wasting money.
93 will give you a noticeable difference over 87 with the factory tuning.

Ethanol and it’s government subsidies are one of the worst things that has happened to the automotive industry. Along with other emissions controls.
Complete and utter crap in daily driven vehicles and absolute destroyers of small engines.
Fortunately I have an Ethanol free 90 octane station not too far away. I run it in all my small engines.
Wish it was a bit cheaper or I’d run it in the Expedition.

Ethanol arguable has a place in high performance specially built applications but no place in most of our motors.
 

mquick5

Full Access Members
Joined
Aug 27, 2018
Posts
589
Reaction score
154
Location
Buckeye Country
I'm not so sure these trucks would run at all on 110 octane. With out a high compression motor, it wouldn't be enough to ignite the fuel. Can probably get away with 100 octane but 110 requires like 12:1 compression or higher, as far as I know.

Sent from my SM-G930T using Tapatalk
 

TobyU

Full Access Members
Joined
Apr 5, 2013
Posts
2,479
Reaction score
873
Location
Ohio
I think it would still run and probably run fine but it would be a waste of money and octane.
You only need enough to prevent detonation and maybe a point or two extra but any more you are wasting and more than likely lowering power output....all ecm management being equal.
 

jeff kushner

Full Access Members
Joined
Nov 30, 2014
Posts
2,330
Reaction score
1,276
Location
North of Annapolis
110 octane is nothing more than a measure of Knock Resistance....NOTHING MORE!

It doesn't require higher compression or higher temps and other bs. It will be overkill(b/c your engine can't adjust for that high octane) for your engine but will not harm it. It may however harm your wallet as it's is very expensive.

I typically run similar fuels in these......cause these Two Strokes were engineered to the fuel we had in the early 70's....100-105 Octane.

jeff

Only the tagged bikes.jpg
 

1955moose

Full Access Members
Joined
Nov 23, 2014
Posts
6,004
Reaction score
1,351
I was reading about Dodge's newest high horsepower animal, their 840 horsepower Dodge Demon. To get to that number, it was tuned for I believe 100 plus octane. That motor might even be able to eek out another 40-60 horse's with 105 or higher, and an even more radical tune. Just in case 840's not enough for the craziest of you horsepower junkies out there!

Sent from my N9131 using Tapatalk
 
OP
OP
Sgt Darkness

Sgt Darkness

Full Access Members
Joined
Oct 24, 2018
Posts
359
Reaction score
98
Location
East Tennessee
Wow, didn’t know when I first posted this thread it would garner so much attention. I was pumping gas a couple weeks ago at Shell and noticed they still had their racing pump going from back when we were racing late models at our local track here. Had to post something after seeing that pump was still in service. Was five bucks a gallon six years ago.....thanks to our members for your attention to this thread....like DW says, “let’s go racing boys”.
 

cmiles97

Full Access Members
Joined
Apr 5, 2018
Posts
457
Reaction score
192
Location
Tampa, FL
110 octane is nothing more than a measure of Knock Resistance....NOTHING MORE!

It doesn't require higher compression or higher temps and other bs. It will be overkill(b/c your engine can't adjust for that high octane) for your engine but will not harm it. It may however harm your wallet as it's is very expensive.

I typically run similar fuels in these......cause these Two Strokes were engineered to the fuel we had in the early 70's....100-105 Octane.

jeff

View attachment 29150

That's a heck of a line up of motorcycles. Love it. I don't have the time to ride more than the 1 I have and it had to be in storage for the winter.:(
 

1955moose

Full Access Members
Joined
Nov 23, 2014
Posts
6,004
Reaction score
1,351
Jeff, I recognize the front three bikes, but what's the two in the rear? One looks like a modern dual purpose, can't tell what they are. Are they Kawasaki's as well?

Sent from my N9131 using Tapatalk
 

joethefordguy

Full Access Members
Joined
Apr 10, 2017
Posts
741
Reaction score
231
Location
Texas
110 octane is nothing more than a measure of Knock Resistance....NOTHING MORE!

It doesn't require higher compression or higher temps and other bs. It will be overkill(b/c your engine can't adjust for that high octane) for your engine but will not harm it. It may however harm your wallet as it's is very expensive.

I typically run similar fuels in these......cause these Two Strokes were engineered to the fuel we had in the early 70's....100-105 Octane.

jeff

View attachment 29150

I was wondering about that. Why won't it adjust for 110, or any, octane? I thought the mechanism was a knock sensor to detect knocking from too much advance, then backing off the timing until it quit knocking. higher octane gas allows the engine to advance the timing more, correct?
 

Adieu

Full Access Members
Joined
Dec 22, 2016
Posts
3,717
Reaction score
798
Location
SoCal
Anybody ever tried using 110 oval track racing gasoline? What’s the highest octane fuel you have ever used? Will our Expy’s run ok on non-ethanol fuel, for the 3.5TT engine?

E85 ethanol *is* the highest octane fuel semi-widely available in America...

But was the 3.5 a flex fuel vehicle like the 5.4?
 

jeff kushner

Full Access Members
Joined
Nov 30, 2014
Posts
2,330
Reaction score
1,276
Location
North of Annapolis
The reason that our engines won't calibrate for 110 octane is that the parameters engineered for sensors requires very tiny adjustments over the range of "typical" fuels today. Therefore it would make sense not to set the "range" much higher or lower than required. Our computer simply won't "see" the octane much above 95.



Thanks Cmiles....

The bikes are in order front to back,

1975 H1 500cc two stroke triple-built as a test engine, it includes enough mods to run with every other bike here.
1975 S1 250cc two stroke triple- but with highly modded 350 cc cylinders, 26mm Flat Slides, etc.
1975 H2 750cc two stroke triple...100% original.
1982 Yamaha 650 Turbo- Factory stock other than modded boost system for 18PSI.
2007 Suzuki Vstrom DL1000K7-LC Vtwin. Modded for touring....a rock of reliability.



The CB350G was given to Kerry and I sold the 400F Supersport.....I'm not a big 4 stroke fan.

1974 Suzuki GT750L water-cooled two stroke triple--next project

1975 Suzuki GT550's..one is highly modified()
the other stock.

There is also another '75 H1 and a '72 blue H1 behind the GT750.....and another H2, a '74 in there somewhere too.

jeff

CB350 complete left side 1.JPG

GT750.jpg

mobikes.jpg
 

powerboatr

Full Access Members
Joined
May 16, 2016
Posts
981
Reaction score
380
Location
North East Texas
i run a tank of non ethanol 89 octane periodically
makes a difference in mpg, but not enough to warrant the additional 35 cents per gallon..that is a hard pill to swallow.
 

Members online

Forum statistics

Threads
57,016
Posts
535,899
Members
54,714
Latest member
Budman55
Top