Vigilante
Well-Known Member
Are there 2 or 3 sensors on this t case? I have replaced the 2 HALL sensors, the shift motor, the 4x4 switch on the dash, and STILL have a flashing 4x4 light.
Shifts into 4hi and 4low just fine. However, it sometimes binds as if it is in 4x4 in a turn on a high traction surface. This is not normal, as neither of my expeditions have done this before until recently.
Is there something I could be missing?
Shifts into 4hi and 4low just fine. However, it sometimes binds as if it is in 4x4 in a turn on a high traction surface. This is not normal, as neither of my expeditions have done this before until recently.
Is there something I could be missing?
