I was playing in the snow switching between 4h and 4l and a4wd, and yes i was switching between the three according to the manual, When i was going from 4l to 4h/A4wd (in neutral, stopped, and foot on brake) all i got was the normal clicking from dash, and then nothing so i tried again same clicking noise then nothing, tried again and then no more clicking noise and was still in 4low so for the heck of it i turned the truck off and started it back up then it was out of 4low, but i have no A4wd and can not switch to 4h or 4l, i check the fuse under hood #104 which is the 4x4 clutch fuse, which is good would like some help before i start spending money. Also when i try the switch i get nothing no clicking noise no light just nothing..lol, Also i have no lights on dash, and have tested on some ice i only have 2wd even though the switch is on A4wd.
1999 Expedition XLT
- Thread starter sma1986
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thermo
technical advisor
- Joined
- Apr 18, 2011
- Posts
- 1,404
- Reaction score
- 65
sma, your transfer case motor has failed/froze. Unfortunately, this results in having to put in a new transfer case motor. Fortunately they are fairly cheap and easy to install.
Captain Morgan
Full Access Members
Maybe he's lucky and it's just the connections to the transfer case motor?
Similar threads
