2010 el limited no charge at all

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

catlinyancey

New Member
Joined
May 4, 2025
Posts
3
Reaction score
1
Location
Minnesota
2010 el limited 3 different alternators, 2 different batteries, bypassed fuse link not getting any charge or power from alternator checked all connections nothings corroded or lose getting 9 volts from pcm to alternator
 

DieselMonk

Full Access Members
Joined
Dec 29, 2024
Posts
593
Reaction score
340
Location
Atlantic Canada
You’re not getting something like p0620 or a p0622 codes?
Take a multimeter and measure the voltage across the battery when the alternator kicks in / out.
Check for engine ground, clean the battery posts and the terminals, look for pin fitment or connector issues (gencom and genmon pins). Sounds like you need a proper diag and or an oscilloscope. What happens if you rev the engine or put like a heavy load on (fans, lights, defrost heaters etc)?
 
OP
OP
catlinyancey

catlinyancey

New Member
Joined
May 4, 2025
Posts
3
Reaction score
1
Location
Minnesota
So I replaced a pulley that looked bad just for S&G and it immediately gave me power to my alternator after I started it with that bad pulley replaced now I am working on replacing all pulleys and the serpentine belt as we speak to see if that helps
 

Members online

No members online now.

Forum statistics

Threads
57,013
Posts
535,878
Members
54,708
Latest member
Landsbutter
Top