grdsman
Full Access Members
So I got the fronts installed just fine and am happy with how they feel. I didn't do the rears because I could tell that the stock shock is WAY bigger diameter than the Bilsteins that Stage 3 sent me that are supposed to be compatible. I have a hard time believing that the spring seat will sit firmly on these new rear shocks. Has anyone else installed the 24-285063-2 rears that Stage 3 has at
https://www.stage3motorsports.com/2...5100-Rear-Strut-Assemblies-0-1-Lift-Pair.html ?
Also, is the spring perch on the stock shocks welded on or just pressed? These look like they are welded on, but it may just be an optical illusion and they'll press off. The fronts were not pressed on and knocked off with a light blow of the hammer.
View media item 7019
Mike
https://www.stage3motorsports.com/2...5100-Rear-Strut-Assemblies-0-1-Lift-Pair.html ?
Also, is the spring perch on the stock shocks welded on or just pressed? These look like they are welded on, but it may just be an optical illusion and they'll press off. The fronts were not pressed on and knocked off with a light blow of the hammer.
View media item 7019
Mike