3rd row removal

[LastExpo2000]

I was told I could remove my 3rd row but can't seem to get it out. Does anyone know how to?

 

[KWT2000]

I was told I could remove my 3rd row but can't seem to get it out. Does anyone know how to?

fold the seat down the lever is on the passenger side then from the rear in the middle of the lower portion there is a bar pull it up and slide the seat back... not the easiest thing to do by your self but it is doable

 

[LastExpo2000]

fold the seat down the lever is on the passenger side then from the rear in the middle of the lower portion there is a bar pull it up and slide the seat back... not the easiest thing to do by your self but it is doable

Thanks, it was a lot easier than I thought. I thought I was going to need to unbolt something

 

[panda24619]

i do it all the time, reason i leave it in... makes my sub sound better and its TOO dam big to put anywhere. haha

 

[KWT2000]

Thanks, it was a lot easier than I thought. I thought I was going to need to unbolt something

if the seat belts where they hook to the floor are in the way they un hook also just FYI

takes about 2 seconds

 

[panda24619]

put a key in that hole and pull on the belt. it pops off. then where the belt goes into the side theres a little cover, pull that off, put the belt connector in there and put the cover back on, makes it look cleaner and no belt in the way of anything.

 

[alaskanexpy]

i just put mine back in my excursion. same seat. not a big deal even by yourself and i'm alittle guy lol

 

[panda24619]

i just put mine back in my excursion. same seat. not a big deal even by yourself and i'm alittle guy lol

is it really? cheap ass ford right there. haha but i lift mine all the time. grab the "back" of the seat, the head rest area, when its all collapsed, and the lever and lift out. easier like that.

 

[KWT2000]

is it really? cheap ass ford right there. haha but i lift mine all the time. grab the "back" of the seat, the head rest area, when its all collapsed, and the lever and lift out. easier like that.

make your trucks a little taller and see if it is still as easy

 

[panda24619]

make your trucks a little taller and see if it is still as easy

im not short like you northerners are! i wonder if talls can get the 3rd row out of walnuts truck with out a step ladder.

 

[alaskanexpy]

i allways have my folded down when pullin it in/out. just keep in mind i'm 125lbs soaking wet. but 5'10" lol i'm able to wrangle it in there pretty quick/easy.


i really want to find a junk expy w/3rd row and cut out the floor mounts and add them to my expy. one option i'm missing that i wanted!

 

[panda24619]

what do you want to do? the floor mounts? dont they all have floor mounts? and dont you have a 3rd row? im confused...

 

[KWT2000]

im not short like you northerners are!

im 6'4...

 

[panda24619]

im 6'4...

one in how many? haha my aunt is from seattle and shes SHORT! but i guess the more north you get the shorter you get. look at alaskanexpy. haha

 

[alaskanexpy]

what do you want to do? the floor mounts? dont they all have floor mounts? and dont you have a 3rd row? im confused...

3rd rows in expys were optional. mine did not come with one. it has a smooth floor pan in the rear. so i need to get the latches cut out of the floor of a expedition or excursion with a 3rd row and weld them into my rear floor pan so i can then have a 3rd row

 

[walnuts4x4]

notherners short??? I'm 6'3"... and no problems removing my 3rd row seat...

 

[X_P_Diddy]

Alaskan- Heres and option for you. if you do go the junkyard route remember to cut at least an inch around the brackets so you have a solid surface to weld

http://store.theseatshoponline.com/...ckets-for-expedition-excursion-navigator.aspx

 

[Soldier777]

you shouldn't need to weld anything I am pretty sure you can just bolt it on. The holes are already there or they just need to be drilled. You should be able to see where they need to be drilled

 

[Explor2Exped]

i do it all the time, reason i leave it in... makes my sub sound better and its TOO dam big to put anywhere. haha

Makes your sub sound better..?? Should I do this also, hah..

 

[X_P_Diddy]

you shouldn't need to weld anything I am pretty sure you can just bolt it on. The holes are already there or they just need to be drilled. You should be able to see where they need to be drilled

I meant if he cuts factory brackets out of a junk expy. Those aftermarket ones can be bolted easily. I usually just still welded for a stronger hold