6 Disc Changer

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BiggRigg

New Member
Joined
Feb 11, 2004
Posts
4
Reaction score
0
I have a 2000 EB and the in console changer is giving me a
"empty mag" message with the magazine full of cds. I can hear it searching for cds but it only searches for disc 4,5, and 6. Once it finishes searching it tells me "empty mag". Any ideas would be appreciated.
 
Last edited:
OP
OP
B

BiggRigg

New Member
Joined
Feb 11, 2004
Posts
4
Reaction score
0
I took the changer out and took it apart. I found the rails that guide the mechanics of the device to be out of line. I pushed and pulled a little bit and it snaped back in place. It works for now but who knows for how long. Even a blind hog will find an acorn every now and then.
Thanks.......
 
G

Guest

Same here...I had one in my '98 that went haywire a couple of times. Pulled it out both times and had to take it apart to get things free'd up. Almost was like I knew what I was doing because it worked when I was done! I sprayed some silicone on the slides while I was messin' with it just to lube things up a bit. Was still workin' when I traded it in at 118K.
 
Top