98 expo getting a makeover

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

heardj

Active Member
Joined
Jul 23, 2011
Posts
28
Reaction score
0
Location
WI
I currently have a single 18" tc9 based sub. Freshly built no box yet. Plans with be 8 cuz ft 4th order after displacements. According to winisd it will play from 23hz through 72hz with authority. Sub will be ran off an old school mm4k. Just need to repair the output section.

The front stage is nothing special. May be lacking but for now, who cares. Factory premium ford 6x8. They will be powered by a pierce audio emp amp. 45rms x4 @4 ohms if I remember correctly. Tweeters will be 8 gm delco's ran off another emp amp. Like I said nothing great.

I've ripped out my center console and started to mod my spare to fit the 2 pierce audio amps into the arm rest. Got almost finished with that and decided to just make my own center console amp rack. Amp rack is still in the works and won't be anything great. I get very little time to work on it. It will house 2 pierce audio 4 channel amps, an mm4k amp, and 1-2 batteries. If I'm lucky I may be able to squeeze in a tray to hold crap as well. Only have 1 battery for right now.

As for a head unit, I've got a clarion eq that I will be using along with my cell phone for music for the time being. I will eventually be running a 9-10" tablet but figured I can use my phone for the time being and I should spend the money else where. I have 3 eBay digital volt meters. There tiny! Nothing special.

And now for some pics.
20130407_171619_zpsdcf29eac.jpg
20130401_165834_zps8404b719.jpg 20130403_183033_zpsc6caad2f.jpg
20130406_193113_zps2a6aa7e7.jpg
20130406_193127_zpscd366281.jpg

20130410_085714_zps3a3e932b.jpg
20130404_194846_zps525f30d7.jpg
20130416_092656_zps3a89f74a.jpg

20130416_092639_zps9d63ff6b.jpg

This is where I`m at today.

20130422_083555_zps4494d019.jpg
20130422_084039_zps26d8a771.jpg
20130422_084048_zps4b4a7dcc.jpg
20130422_091351_zpsb1491129.jpg
20130422_091628_zpsfb1bdeff.jpg
20130422_091635_zps272e104d.jpg
have to make an additional piece to support another battery.
 
Last edited:
Top