Ahhhhhhhhh!!!! Frustrated, help please!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Explor2Exped

Full Access Members
Joined
Mar 29, 2011
Posts
701
Reaction score
3
Location
Nashville, TN
I have no idea which wires go where.

I thought if I printed off a wiring chart from 12volt I could do this myself, clearly not!

Any help would be greatly appreciated!!
SDC12319.jpg
 
OP
OP
Explor2Exped

Explor2Exped

Full Access Members
Joined
Mar 29, 2011
Posts
701
Reaction score
3
Location
Nashville, TN
1998 Ford Expedition Stereo Wiring
Constant 12V+ White/Purple
Switched 12V+ Black/Pink
Ground Black/Green
Illumination Blue/Black
Dimmer n/a
Amplifier Remote Blue
Antenna Right Front
Front Speakers 6" x 8" Doors
Left Front (+) Light Blue/White
Left Front (-) Orange/Light Green
Right Front (+) Dark Green/Orange
Right Front (-) White/Light Green
Rear Speakers 6" x 8" Rear Doors
Left Rear (+) Tan/Yellow
Left Rear (-) Gray/Light Blue
Right Rear (+) Brown/Pink
Right Rear (-) Orange/Red
 

KWT2000

Full Access Members
Joined
Feb 4, 2010
Posts
2,378
Reaction score
43
Location
NINE MILE FALLS
no it means white wire with purple stripe...

on the head unit red should be switched power and yellow should be constant with black for ground... the blue wire should be amp on/off
 

GAINMOB

Full Access Members
Joined
May 19, 2010
Posts
14,565
Reaction score
893
Location
Newport News, VA

dude...sounds like you dont know what youre doing...sooooooooo...go ahead and pay to get it done by a shop or best buy...

future reference...buy a harness...plug the to the factory plug...the wires at the end of the harness connect to the wires from the HU...everyone has to learn...i did the same thing 14yrs ago too....
 

KWT2000

Full Access Members
Joined
Feb 4, 2010
Posts
2,378
Reaction score
43
Location
NINE MILE FALLS
i did too years ago... but you learn the hard way that most cars wires are not marked... but thats ok
 
OP
OP
Explor2Exped

Explor2Exped

Full Access Members
Joined
Mar 29, 2011
Posts
701
Reaction score
3
Location
Nashville, TN
dude...sounds like you dont know what youre doing...sooooooooo...go ahead and pay to get it done by a shop or best buy...

future reference...buy a harness...plug the to the factory plug...the wires at the end of the harness connect to the wires from the HU...everyone has to learn...i did the same thing 14yrs ago too....

Yeah I really f*cked myself over....
 
OP
OP
Explor2Exped

Explor2Exped

Full Access Members
Joined
Mar 29, 2011
Posts
701
Reaction score
3
Location
Nashville, TN
I tried rewiring everything to at least get the factory stereo working again & all I can get is light out of it.

Did I maybe not wire it back good enough or is it pretty much shot from the damage I've done?

SDC12321.jpg
SDC12323.jpg
 

ELVATO

Full Access Members
Joined
Nov 25, 2006
Posts
2,634
Reaction score
34
Location
Orlando, FL
Yea, make sure you didn't accidentally blow a fuse.

Also, make sure these are wired up well:

Constant 12V+ White/Purple
Switched 12V+ Black/Pink
Ground Black/Green
 
OP
OP
Explor2Exped

Explor2Exped

Full Access Members
Joined
Mar 29, 2011
Posts
701
Reaction score
3
Location
Nashville, TN
Yea, make sure you didn't accidentally blow a fuse.

Also, make sure these are wired up well:

Constant 12V+ White/Purple
Switched 12V+ Black/Pink
Ground Black/Green

I twisted every wire then bent it over & taped it. I think there may have been one wire that wasn't stripped that great, so I'm guessing I have to go threw everyone to find it. ughhhhh....
 
OP
OP
Explor2Exped

Explor2Exped

Full Access Members
Joined
Mar 29, 2011
Posts
701
Reaction score
3
Location
Nashville, TN
Hopefully it's just a fuse.

I'm new to all this electrical work so I forgot to disconnect the battery & snipped a wire. It sparked at me, so maybe that blew the fuse?
 
Top