Brake Problems

[invmgmt]

I have a 2010 and need to have the front rotors turned (dealer said they are warped). So, I need to remove the calipers. However, the two bolts that hold the outer bracket of the calipers (not sure of technical name) appear to be frozen. I tried using a breaker bar but no luck. Am i doing something wrong? Any ideas?

 

[KWT2000]

they use lock tight from the factory, use a cheater bar or impact gun

 

[jimb726]

As stated, they are loctited in from the factory. You dont want those bolts coming out!!

 

[VTfireftr]

You will also need a 9mm allen wrench to loosen and remove the caliper slide pins for correct removal of these calipers.

 

[mindgame]

Lisle 33960 - Brake Caliper Hex Bit | O'Reilly Auto Parts

and a breaker bar