2003 Ford expedition, Eddie Bauer edition. 5.4l Triton.
Explorer died, family friend sold me their expedition on the cheap. It's a clunker but I needed a car. Fixed the breakline, replaced rotors and pads. Did a gotts mod for the intake and just took the LEDs from the explorer to throw on the expedition.
Noticed the fog were on with the highbeams, then the driverside lights flickered and stopped. Went and checked my flash relay, it's brand new and is fine. Checked fuses, saw they did a Bambi mod (believe this is what it's called). Well, it's late and I had to gtf home.
I'll remove the Bambi mod, bend the ground back and see if that's the issue. To be safe I did order a new relay .
Any suggestions? Fuses are fine replaced some to be safe. Will check the socket tomorrow along with the bulbs. Did notice the highbeam indication is slightly glowing even when off.
Passenger side works though which is odd.
Explorer died, family friend sold me their expedition on the cheap. It's a clunker but I needed a car. Fixed the breakline, replaced rotors and pads. Did a gotts mod for the intake and just took the LEDs from the explorer to throw on the expedition.
Noticed the fog were on with the highbeams, then the driverside lights flickered and stopped. Went and checked my flash relay, it's brand new and is fine. Checked fuses, saw they did a Bambi mod (believe this is what it's called). Well, it's late and I had to gtf home.
I'll remove the Bambi mod, bend the ground back and see if that's the issue. To be safe I did order a new relay .
Any suggestions? Fuses are fine replaced some to be safe. Will check the socket tomorrow along with the bulbs. Did notice the highbeam indication is slightly glowing even when off.
Passenger side works though which is odd.
