Ford Optional Factory Dash Cam

[LazSlate]

Anyone installed this Ford Cam?

VHL3Z19G490C

2020-2024 Ford Front Dashcam 140 Degree View | Lasco Auto Parts

VHL3Z19G490C - 2020-2024 Ford Front Dashcam 140 Degree View - Lasco Auto Parts

www.lascoautoparts.com

Looks like it has some factory harness and its pretty compact.

 

[Lou Hamilton]

Installation instructions make it seem much easier that hardwiring it into the fuse panel: https://www.levittownfordparts.com/docs/VHL3Z-19G490-C.pdf

It uses an inline ODBII connector.

 

[mamores24]

Following...

 

[Hamfisted]

It's the bottom of the line Thinkware F70 camera. Only 1080p and no built in GPS. It was probably Ok when the Gen3's came out, but today it's pretty dated. There's much better options out there, from Blackvue, or even Thinkware. They're easy to install, and you can pull power from your overhead console. That Thinkware F70 is about $90 at Bestbuy.






.

 

[Lou Hamilton]

It's the bottom of the line Thinkware F70 camera. Only 1080p and no built in GPS. It was probably Ok when the Gen3's came out, but today it's pretty dated. There's much better options out there, from Blackvue, or even Thinkware. They're easy to install, and you can pull power from your overhead console. That Thinkware F70 is about $90 at Bestbuy.

I agree.

After downloading the instructions and looking at it closer, it really is a low end model. I'll be keeping my Viofo A129 for the time being. nothing wrong with it, just thought it might be an easy integration.