Front Washer not working

[poncchorelly]

look at the where the relays plug in on will 4 connectors one will have 5. put a 5 pin relay in the one with 5 connectors. I think is an ab relay

 

[poncchorelly]

all the relays are 4 prong except the number 1 should 5 prong. find the 5 prong relay and swap it.

 

[poncchorelly]

I just looked at my expedition. number 1 relay should be 5 prong!

 

[JoJoDaClown]

Well, I'm genuinely confused. It was indeed the relay being in the wrong location. The 5 pin relay was not in the relay 1 position, but in the relay 3 position for some reason, which is the blower motor relay. The only thing I can think of is the dealer swapping relays when they were diagnosing the bad blower motor harness that ended up being a recall, and not putting it back in the correct place.

Thanks for your help!

 

[poncchorelly]

yep my blower quit working and the first thing I did was swap around some relays because those relays are notorious about going bad . then discovered the bad connection at the blower resistor , never realized I caused my own washer problem!