Fat Jack
Member
Just got through with doing a Gotts mod. First thing i noticed is the BAD ASS new sound comming from Talulah, completely differant sound than stock. Secondly, when i took it on a test drive She just wasn't the same truck. The throttle response was so much greater than before, just a tap of the skinny pedel and Talulah was excited and ready to go. Here's the funny part. I read all the crap i could on this mod and its sounded horrible, Dremel here, file there and be sure not to run the skinny flat screwdriver in to your hand, crotch, or fat belly iffin ure like me (cmon i quit all my other vices let me have fried food). so i start at the fender (oh yeah that worthless peice of crap 2" rubber chingadera will be replaced with a 3" PVC pipe) After all more air is the deal aint it? Any ways i removed each peice with the truck running so i could spray the sensors as i came to them. I get all the parts off and start to remove the big rubber thing off the big end of the box and im pryin and pulling and cussin up a storm. i get the peice almost all the way off and my brother in law says take a break and ill work on it for a while, i hand it to him and grab a beer and as i crack open the beer and turn around just in time to see him reach through the big rubber fitting and just pull the inside noise reducer out thru the big rubber peice. no cutting no grinding no sanding. He just reached in and pulled it like he had been doing it all his life! i instantly opened another beer. SOOOOOOOOOOOOO before you do this mod look in the box and see if yours wount just pull out also? Way to much Truck for my GUCCI wearin brother
Last edited:
