Looking to find quality aftermarket mirror assembly for my 2007 Expedition limited. Any suggestions?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Joined
Feb 11, 2020
Posts
9
Reaction score
1
Location
Va.
Looking for quality aftermarket replacements for passenger and driver side mirror assembly. Any suggestions?
 

mjp2

Full Access Members
Joined
Apr 19, 2017
Posts
486
Reaction score
307
Location
Howell, NJ
I second these mirrors. They made the truck infinitely easier to drive as I could see everything I needed to.
 

Steve Hartman

Full Access Members
Joined
Mar 18, 2018
Posts
101
Reaction score
20
Location
Lincoln, MT
Got these from Vevor for $169 a pair! Love 'em! Driver side change out in 20 minutes. You'll need 7mm (door handle plate, driver panel, one on end, two at bottom, plus two in door arm rest,) You'll need a pick tool to open little retangular door in arm rest. You'll need 11mm deep for old mirror. NOTE: New mirrors came with only one 10mm nut on one post; but old and new threads the same so reuse old nuts. Also, both old and new mirrors have a notched fit on top which makes changing the mirrors a breeze. New mirror will lock into slot without needing two people to hold the mirror. A breeze. Also, you really don't need to unhook your panel wiring. Just let it hang. Remove vapor barrier and boom! You're there. Took a picture after replacing only driver's side mirror! Look at the difference! :O
AND! I finally get to post something "FOR" you guys instead of t'other way around! Feels good! LOL!

EDITED: Forgot to tell you! Mirrors are powered and heat.... providing you have the wiring for heat. :O

EDITED AGAIN: My mistake. The other mirror has all 3 "10mm" nuts. LOL!

1730157527312.png
 
Last edited:
Top