Nedd some help diagnosing a new problem!!!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

01blkgt

Member
Joined
Oct 23, 2006
Posts
11
Reaction score
0
Location
ATX
So I have a 06' EB Expedition and on the way to go grocery shopping the truck started acting pretty weird. We were driving down the neighborhood when it seemed like the starter just started to kick on by itself while we were in drive and moving at around 30mph. It made some whicked metal on metal sound and I immediately pulled off to the side and shut her off. When I went to start it again, it immediately fired up when put on the "on" or "ACC" position without having to move it that extra 1/4" like normal. Continued to do this as we turned around, but I'm not quite sure if it is a starter/solenoid or ignition switch type problem. Anyone have any insight?
 

green03

Full Access Members
Joined
Apr 28, 2006
Posts
630
Reaction score
4
Location
College Station, TX
that really sounds like the ignition switch but who knows on these computer controlled trucks.... it could even be a wire in the harness crossing to another.....

Matt R
 
OP
OP
0

01blkgt

Member
Joined
Oct 23, 2006
Posts
11
Reaction score
0
Location
ATX
That's what I assume, but not 100% sure. Is there anyplace online that has tghe breakdown on replacing said switch?
 
OP
OP
0

01blkgt

Member
Joined
Oct 23, 2006
Posts
11
Reaction score
0
Location
ATX
Nope, she has 52k miles on it and am well passed the warranty period. Anyone know where the ignition module is?
 
Top