Need to be lower 03 expedition

[DUBNXR8D]

I have the 2 inch drop springs from beltech but i want to go lower without putting air ride on it has anyone cut a little off their springs i know its not the nest thing to do also if anyone knows about some dropped struts or what i need thanks

 

[Expedition]

Yes I cut some off. I have a 3/3 Drop.

 

[Expedition]

Hopefully will be a 4/4 drop soon.

 

[Expedition]

Pics are here http://expeditionforum.com/showthread.php?t=6595 since then I have removed the roof rack when I go 4/4 I'm going to put 20s with a smaller tire.

 

[GAINMOB]

do you still have the factory air suspension?

 

[DUBNXR8D]

DID U CUT UR FACTORY SPRINGS OR DID U CUT UR DROP SPRINGS HOW MUCH DID U CUT OFF??? I HAVE 22s N WANT IT 1 TO 2 INCHES LOWER THEN THE 2 IN DROP THAT I HAVE ALREADY ..... MY 03 DIDNT HAVE THE FACTORY AIR RIDE THANKS FOR THE HELP......

 

[Expedition]

My truck is 4x4 so I couldn't use the Belltech Springs I got the Eibach Springs which do like 1.5/1.7 (I think) and my friend who knows about drops and what not. He cut off one inch on all of them and it took me to a 3" drop. He would of cut more, but once you cut you can't go back. Also when looking to cut the springs you also need to keep in mind your camber adjustment, because you will get to the point where you will not be able to set your camber back to 0. Then you will be eating up tires QUICK.

 

[DUBNXR8D]

Thanks for the help if u get a chance to ask how many coils he cut to get 1 inch whether it was half a coil or what not appreciate the help

 

[Expedition]

nice truck, can you measure from the center of your hub to your fenders?

 

[DUBNXR8D]

Sure will ill measure it in the morning n post it tomorrow have a gnight

 

[DUBNXR8D]

I measured it and its 17 1/2 inches from the center to the fender