New member, 1st gen ex, upgrading wheels and tires

[chuckh]

I'm glad I came across this site a couple weeks ago! Ive been reading since and have really found a lot of threads helpful including those concerning wheel and tire packages. With this said I have all but pulled the trigger on this deal but I want to know if this size and offset will fit without any lift. If it barely rubs and I have to trim some thats not a big deal but the last thing i want is for the tires to look to "small" inside the wheel wells.

Here is the package I am interested in and it lists offset but im lost when it comes to those measurements.
20" XD MONSTER RIM & TIRE NITTO TRAIL GRAPPLER 33" | eBay

 

[Jay87LX]

If iyt were on a 17" rim I would be inclined to say yes but maybe not on 20's- I am sure others will chime in. If not a 2' lift is simple, spacer in rear and a quick torsion bar crank would do the trick

 

[chuckh]

Thanks! They still have a 33" overall diameter, just a smaller sidewall with 20's. But if need be, the spacer and torsion crank sounds like the best solution

 

[GAINMOB]

i believe it will but not 100%

 

[FordandPolaris]

I have 33" tires with no lift. No rubbing at lock, just some trimming of the lower valance. Main thing is to make sure that they are the right bolt pattern and that they are not too wide. Mine are 11.2" wide, and that is about as wide as you could hope for without wheel spacers and no rubbing.

 

[chuckh]

I have 33" tires with no lift. No rubbing at lock, just some trimming of the lower valance. Main thing is to make sure that they are the right bolt pattern and that they are not too wide. Mine are 11.2" wide, and that is about as wide as you could hope for without wheel spacers and no rubbing.

are those the 285/75/16's from your sig?

 

[FordandPolaris]

Yeah all the pics in my albums are of the truck sitting on the 285's.