Power Fold Mirror issue

[spotdog14]

I washed the beast yesterday in 5* temps (had to get all the salt off). Anyways I have to use power fold mirrors to get it into the garage and be able to actually get out of it. Anyways long story short I went to deploy the mirrors this morning on my way to work after exciting the garage and the passenger side one folded all the way around.

I pressed the button a few times and it folds back in normal but when folding out will go all the way around. I figure its just got some ice or something stuck in it and its not a big deal (because I can just get out and position it how I need it) but figured I would ask if there is anything I can do to correct it?

Also what is the part number for a power fold heated passenger side mirror? Don't they they run like $400?

 

[spotdog14]

I solved my issue. Here is the information I found in the manual:

The mirrors may be moved
inward/outward manually, however,
if a mirror is moved manually, it will
need to be reset. To reset: with the switch in the center position,
press the switch down to fold the mirrors in and wait a short period
(8 seconds). An audible click will be heard indicating
re-synchronization. If the click is not heard, use the switch to fold the
mirrors out, then in, until the click is heard. After that, the mirrors will
operate to their normal positions until they are again moved manually.