Kostya
Member
I’m thinking about getting leveling kit, new good shocks and Raptor wheels on my 07 Expedition Eddie Bauer. Have anyone done this? Can that be done and what would you recommend? Any drawbacks?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Have you tried a forum search? My memory tells me that the axle shafts are a wee bit too long & prevents the center caps from being installed on the raptor wheels.
@Black has done much research on shock replacements & upper control arms.
Until I reach 120k or 5 more years I wanna keep that stuff stock for free replacements.
Leveling kit? Ready lift 3/2". But if you do the right shock upgrade you wouldn't need the spacers. Have fun reading up!
Thats the problem, I can’t find extendet shocks and thats why I’m considering readylift and new shocks
Should I use stock springs with them?And you won’t.
Spacers at the moment are your only option to lift these currently.
I presume F150 front will work on your model by just removing the cross beam bolt connector from the bottom eyelet and using your factory lower bolt. But that is purely a presumption.
Then you only get 2” of lift. You will still need a spacer for the rear. Unless you go a full custom coilover from King.
Spacers and Bilstein 4600s for the Expedition is your easiest way to lift these.
There are no suspension lift options.
ICON is supposed to be working on an adjustable coilover kit. Which will likely provide 2.5” at most.